31.05.2018 – Firmware Update 2.2.0.29 (Mouhijoki) – early access

Firmware Update 2.2.0.29 (Mouhijoki) – early access

 

Ein neues Firmware Update mit dem Namen „Mouhijoki“ bzw. in der Version 2.2.0.29 ist soeben für early access User erschienen. Das Update erhalten zunächst alle Jolla Geräte (Jolla 1 und Jolla C). Besitzer von Xperia X werden heute ein wenig gedulden müssen, denn die Freigabe erfolgt in der zweiten Welle. Das Update wird es ebenso für das Tablet erscheinen, allerdings erst dann, wenn das Update Offiziell erscheint (~ Juni).

Was sind die Highlights?

  • Android Support wurde für Jolla C und Xperia X Aktualisiert
  • Status einer Dateiübertragung via Bluetooth werden in Ereignisansicht angezeigt
  • [XperiaX] Auto/Manuell Fokus wurde behoben
  • E-Mail App wurde etwas aufgepeppt
  • Galerie App kann nun TIFF Dateien anzeigen
  • [XperiaX] Fingerprint Sensor wird nun Supported
  • [XperiaX] droid-system wurde aufgeräumt und bietet etwas mehr Speicherplatz
  • Emoji wurde in die virtuellen Tastatur eingebaut
  • Sailfish Secrets kann man sich manuell über Terminal nachinstallieren zypper in sailfish-secrets-ui
  • Dateien können über den Hauseigen File Browser Entpackt werden: Einstellungen > Speicher > Dateimanager
  • [XperiaX – Dual Sim] Dual Sim Support für die Dual Sim Version des Xperia X (F5122)
  • VPN Support wurde verbessert

 

Release Notes

Release Highlights

This list contains examples of new features (and some bug fixes) added to SailfishOS compared to the previous release 2.1.4. The release notes of 2.1.4 can be found here: https://together.jolla.com/question/179223/release-notes-214-lapuanjoki/

Mouhijoki 2.2.0 adds the support for Sony Xperia X dual-SIM (model: F5122). Hence Sailfish X can be installed to this device, too. Renewed instructions for installing Sailfish OS to Sony Xperia X devices are here – covering Windows, Linux and Mac computers. The same instructions are valid for F5121 and F5122, however, there is a dedicated flashable image for each device model.

Aliendalvik

  • Updated Android Support of Jolla C from version 1.0.69-1 to 1.0.89-1
  • Updated Android Support of Xperia X from version 1.0.85-1 to 1.0.89-1, fixing:
    • memory leak fixed — Android apps shouldn’t run out of memory that often anymore
    • window handling and crash dialogs
    • application scaling in cases where Android runtime is preinstalled to the image
    • improvements to aliendalvik packaging (apkd and apkd-configs-home removed when Android Support not installed)
    • User is notified if an Android application requires newer Android API than currently supported in Sailfish OS.
    • Progress and vibration are now honored on Android notifications.

Ambiences

  • ambience switching made to a dialog with explicit save and cancel actions.

Audio

  • audible notifications improved
  • PulseAudio and its modules updated to version 11.1
  • Xperia X: USB audio enabled.

Bluetooth

  • file transfer status can now be seen in Events View, too.

Calculator

  • context menu added to Calculator for copying results to the clipboard. From clipboard the result can be pasted to a message, email, note and so on.
  • fixed layout on tablet.

Calendar

  • day view is opened now to a meaningful time (instead of midnight)
  • ongoing sync has visual indication
  • event page start/end time styles adjusted.

Camera

  • Xperia X: camera opens unfocused now
  • Xperia X: continuous focus replaced with autofocus – this helps to take better pictures
  • „Return to viewfinder“ action button moved from camera roll toolbar to top-right dismiss button <- I’d replace this with mentioning we have new UI style on camera roll view, it’s not only dismiss button
  • camera framerate now configurable through dconf <- is this something we need to advertise? implemented to support devices that didn’t work with earlier hard-coded value.

Clock

  • fixed time rounding bug on stoptimer.

CSD (built-in test tool)

  • GPS signal strengths provided. Different GPS satellites indicated (GPS, GLONASS, BeiDou, etc.)
  • device screen resolution and touch point coordinates are shown.

Developer mode

  • detached from Jolla Account
  • security code needed to disable developer mode.

Device management (MDM)

  • API created for disabling mobile data on particular SIM cards
  • API created for disabling SMS messaging per SIM card
  • added option to remote wipe API for erasing the data on the device SD card.

Email

  • error notification of unsupported attachments improved
  • added progress indicator for downloading attachments
  • downloading of attachments can be interrupted now
  • downloaded attachments are not written to files unless asked and some other attachment fixes
  • fixed email view sometimes missing page indicators
  • added remorse for discarding a composited email (to avoid losing long texts by an accidental discard)
  • when replying to your own emails keep the recipient fields intact. Continue discussion with the original recipients.
  • split view removed: toolbar added, vertical swipes to traverse items, down swipe to return to album view
  • MMS viewer redesigned to match the Gallery change above
  • gallery can show TIFF files now.

HW adaptation

  • Xperia X: support for fingerprint unlocking added <- I switched ‚detection‘ to ‚unlocking‘ as it’s clearer. good, it is used for that
  • Xperia X: droid-system cleaned up to save space in root partition
  • Xperia X: zram swap enabled.

Keyboard

  • Emoji support added (support for coloured emojis requires Qt update which is planned to happen later this year).

Media

  • „Clear tracker database“ („Refresh media database“) in Utilities works now
  • advance a track on headset call button double click should work now.

Notifications

  • Support for progress bar on notifications
  • Support for vibration hint on notifications
  • Android app notifications don’t turn display on unless request sound or vibra feedback.

Phone

  • call start time and duration shown also for older-than-one-day calls.

SDK

  • customer name added to SDK image names.

Security

  • Sailfish Secrets is an opensource storage and crypto API framework and it’s in early stages. Code and documentation is at https://github.com/sailfishos/sailfish-secrets, early testers and developers are welcome to download it via zypper in sailfish-secrets .

Settings

  • possibility to unzip folders added to Settings > Storage and to file browsers
  • „Android *“ categories in „Settings > Storage > User data“ hidden if Android support is not installed
  • data consumed by SDK builds is shown separately in the Settings > Storage.

Telephony

  • improve dual SIM support by making it more dynamic
  • allow multiple RIL modem configuration files
  • add support for dual SIM variant of Sony Xperia X, model F5122.

UX

  • Remorse timers can be swiped away to commit immediately.

VPN

  • out of beta stage now
  • automatic connecting of VPNs improved
  • installing additional VPN types in VPN settings supported (hardcoded types replaced).

WLAN

  • allow manually setting up network in connection dialog.

 

Issues reported by the community at together.jolla.com and fixed in this update

Changelog

For detailed changelog , see https://together.jolla.com/question/184470/changelog-220-mouhijoki/

Updating your device

Your device must be connected to the Internet and signed into your Jolla account. If your Jolla account is registered for Early Access releases you should receive an OS update notification when an update is available. If you have decided not to take the Early Access registration then you will get the OS update typically one week later.

We warmly recommend making some 3-4 GB of free space to the internal storage of your device before starting the update. Move your pictures and videos to the SD card (or to your PC or cloud service). After the upgrade turn on the option to save pictures and videos directly from the camera to the memory card (Settings > Apps > Camera). This is important particularly in case of „Jolla Phone“ devices (product name „Jolla“ in Settings > About product).

This is the usual drill before attempting to update your devices:

Take a backup of your data before attempting to update your device and save the backup to an SD card or to some other off-device location (PC, your cloud service). Note that videos and images are not included in cloud-based backups. Do not reboot the device while the update is in progress. Do keep the phone connected to a battery charger during the whole process. Device screen may blank out during the update process; you may waken the display by a short press on the power key to monitor the progress.

For detailed instructions on updating software, visit Zendesk: https://jolla.zendesk.com/hc/en-us/articles/201836347

Notification concerning apps from Open Repos

  • If you use Phonehook or Callrecorder from OpenRepos, uninstall it before upgrading
  • If you use oFono from OpenRepos, revert to the official oFono before upgrading
  • If you use Patchmanager, revert all applied patches before upgrading.

About SD cards

New path to sdcard: symbolic link: /media/sdcard/<uuid>/, actual path /run/media/nemo/<uuid>/ Please read our help article on SD cards supported by Sailfish OS: https://jolla.zendesk.com/hc/en-us/articles/201997993 </uuid></uuid>

Known issues

  • Bluetooth pairing and audio connections may still fail in some circumstances
  • trouble with signing in to Dropbox account sometimes
  • Events View has been reported to remain empty in some cases.

Known issues specific to Xperia X

  • [camera] Force autofocus mode for photos, and continuous for video. After this, camera focus is still not ideal – as the camera stays out of focus when it starts until you either tap or try to take a shot – but the pictures seem to be better focused now.
  • Issues with mobile data persist on some SIM cards. Reverting the device to Android and re-installing Sailfish X has helped. See our support article: https://jolla.zendesk.com/hc/en-us/articles/115004283713
  • Xperia X does not power up when alarm time has elapsed
  • Manual network/carrier search lists all networks by the same name (the name of the SIM provider). Use automatic search. If not possible, you need to try several items in the manual search results, unfortunately. The top most item is not necessarily the one that can serve you. (still valid with most SIM cards)
  • Bluetooth: still problems with car equipment, some audio devices and computers.
  • Waking up the device by double-tap does not work
  • Loudspeaker volume level cannot be adjusted high enough (but echo cancellation was added to the audio path in 2.1.4)
  • Sensors:
    • not working: barometer, step counter.
    • compass working in Google Maps, not yet natively.
  • Issues with video playback and video recording (less than before).
  • FM radio missing.
  • Even though all CPU cores get eventually enabled, foreground apps do not always run on the big cores.

 

Changelog

Packages removed

  • build-mkbaselibs – 2012.05.31-1.1.1, build – 2012.05.31-1.1.1, build-mkdrpms – 2012.05.31-1.1.1
  • build-compare – 2009.10.14+git2-1.2.1

Packages modified

aliendalvik

  • Updated : 1.0.85-1 — 1.0.89-1
  • Do not show crash dialogs in a wrong window (or at all).
  • Fix a memory leak in system_server.
  • Improve build.prop creation reliability.
  • Improvements to aliendalvik packaging.

    aliendalvik-translations-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui

    aliendalvik-translations-l10n

  • Updated : 1.9-10.3.1.jolla — 1.10-1.4.3
  • [l10n] Commit from Jolla localization by user jahonen.: 5 of 5 strings translated (0 need review).

    all-translations

  • Updated : 0.4.4-10.3.3.jolla — 0.5.0-1.4.2
  • Unmet requirements: sailfish-archive-l10n-tr, sailfish-secrets-ui-l10n-kn, sailfish-archive-l10n-tt, sailfish-secrets-l10n-it, sailfish-archive-l10n-ta, sailfish-archive-l10n-gu, sailfish-archive-l10n-bn_IN, sailfish-archive-l10n-te, sailfish-secrets-ui-l10n-pt_BR, sailfish-archive-l10n-ko, sailfish-secrets-l10n-pt_BR, sailfish-secrets-ui-l10n-it, sailfish-archive-l10n-da, sailfish-archive-l10n-de, sailfish-archive-l10n-pt_BR, sailfish-secrets-l10n-hi, sailfish-secrets-ui-l10n-nb, sailfish-secrets-l10n-hu, sailfish-secrets-ui-l10n-nl, sailfish-secrets-ui-l10n-fi, sailfish-archive-l10n-zh_HK, sailfish-archive-l10n-es_ES, sailfish-secrets-l10n-en_US, sailfish-secrets-ui-l10n-fr, sailfish-archive-l10n-it, sailfish-secrets-ui-l10n-sl, sailfish-secrets-l10n-sv, sailfish-secrets-l10n-tt, sailfish-secrets-l10n-tr, sailfish-secrets-ui-l10n-zh_CN, sailfish-secrets-ui-l10n-zh_TW, sailfish-secrets-l10n-te, sailfish-secrets-l10n-ta, sailfish-secrets-l10n-zh_CN, sailfish-secrets-ui-l10n-ko, sailfish-archive-l10n-fr, sailfish-secrets-ui-l10n-cs, sailfish-archive-l10n-fi, sailfish-secrets-l10n-gu, sailfish-secrets-ui-l10n-pl, sailfish-secrets-ui-l10n-pa, sailfish-secrets-l10n-nb, sailfish-archive-l10n-nb, sailfish-secrets-ui-l10n-en_GB, sailfish-secrets-ui-l10n-pt, sailfish-archive-l10n-nl, sailfish-secrets-l10n-fi, sailfish-secrets-l10n-bn_IN, sailfish-secrets-ui-l10n-hi, sailfish-secrets-ui-l10n-hu, sailfish-archive-l10n-sv, sailfish-secrets-l10n-fr, sailfish-secrets-l10n-ru, sailfish-archive-l10n-pl, sailfish-archive-l10n-kn, sailfish-secrets-l10n-ml, sailfish-secrets-l10n-mr, sailfish-secrets-ui-l10n-mr, sailfish-archive-l10n-pa, sailfish-secrets-ui-l10n-ml, sailfish-archive-l10n-pt, sailfish-secrets-l10n-en_GB, sailfish-secrets-ui-l10n-et, sailfish-secrets-ui-l10n-es, sailfish-archive-l10n-en_GB, sailfish-secrets-l10n-el, sailfish-secrets-l10n-es, sailfish-secrets-l10n-et, sailfish-archive-l10n-zh_TW, sailfish-secrets-ui-l10n-el, sailfish-secrets-ui-l10n-bn_IN, sailfish-archive-l10n-hu, sailfish-archive-l10n-zh_CN, sailfish-secrets-ui-l10n-ru, sailfish-secrets-ui-l10n-ja, sailfish-archive-l10n-hi, sailfish-secrets-l10n-de, sailfish-secrets-l10n-da, sailfish-secrets-l10n-nl, sailfish-secrets-ui-l10n-en_US, sailfish-archive-l10n-ml, sailfish-secrets-l10n-ko, sailfish-secrets-l10n-kn, sailfish-secrets-l10n-pl, sailfish-archive-l10n-mr, sailfish-secrets-l10n-pa, sailfish-archive-l10n-el, sailfish-archive-l10n-en_US, sailfish-archive-l10n-ru, sailfish-archive-l10n-es, sailfish-archive-l10n-et, sailfish-secrets-l10n-pt, sailfish-secrets-l10n-zh_HK, sailfish-secrets-ui-l10n-zh_HK, sailfish-secrets-l10n-cs, sailfish-secrets-ui-l10n-gu, sailfish-secrets-ui-l10n-te, sailfish-secrets-l10n-zh_TW, sailfish-secrets-ui-l10n-ta, sailfish-archive-l10n-ja, sailfish-secrets-l10n-ja, sailfish-archive-l10n-sl, sailfish-secrets-ui-l10n-tt, sailfish-secrets-ui-l10n-sv, sailfish-secrets-ui-l10n-tr, sailfish-secrets-l10n-sl, sailfish-archive-l10n-cs, sailfish-secrets-ui-l10n-es_ES, sailfish-secrets-ui-l10n-de, sailfish-secrets-ui-l10n-da, sailfish-secrets-l10n-es_ES
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    ambienced

  • Updated : 0.28.3-10.3.1.jolla — 0.29.0-1.4.6
  • [dbus] Add setFavorite dbus api.

    android-tools-hadk

  • Updated : 4.2.2_git20130218-11.10.1 — 5.1.1+git2-10.1.1.jolla
  • Binaries added : android-tools-hadk – 5.1.1+git2-10.1.1.jolla
  • Unmet requirements: android-tools-hadk = 5.1.1+git2-10.1.1.jolla
  • [ubu-chroot] Make bind mounts more robust and less dangerous.
  • [1] http://git.kernel.org/cgit/utils/util-linux/util-linux.git/commit/?id=f0f22e9c6f109f8c1234caa3173368ef43b023eb
  • [core] Add git submodule for Android 5.1.1 release 38.
  • [extras] Add git submodule for Android 5.1.1 release 38.
  • [mkbootimg] Add –dt parameter to specify DT image
  • [rpm] Add tar git packaging.
  • [ubu-chroot] Fix broken ‚exec‘ handling and be quiet by default.
  • [ubu-chroot] Fix crash with >=util-linux-2.27.
  • [ubu-chroot] Let environment know we are within the ubu-chroot

    apkd

  • Updated : 0.7.29-10.3.1.jolla — 0.8.4-1.4.18
  • Unmet requirements: liblipstick-qt5.so.0
  • [apkd] Android settings entry to have consistent capitalization.
  • [apkd] Cleanup Android SDK version logging.
  • [apkd] Read SDK version always from the build.prop.
  • [configs] Drop empty /data/app if it exists.
  • [apkd] Improve error messages when installing broken apk file.
  • [packaging] Make sure filesystem structure is there early.
  • [apkd] Check minimum SDK version before trying to install apk.
  • [apkd] Remove hardcoded default android sdk version 16.

    apkd-l10n

  • Updated : 1.74-10.3.1.jolla — 1.85.1-1.8.1
  • [l10n] Branched apkd from version 1.85
  • [l10n] Commit from Jolla localisation : 45 of 45 strings translated (0 need review).
  • [tpl] translation templates update for 0.8.5
  • [l10n] Commit from Jolla localization : 45 of 45 strings translated (0 need review).
  • [tpl] translation templates update for 0.8.4
  • [l10n] Commit from Jolla localisation : 45 of 45 strings translated (0 need review).
  • [tpl] translation templates update for 0.8.3

    as-daemon-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.2
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    as-daemon-l10n

  • Updated : 1.20-10.3.1.jolla — 1.21.1-1.5.1
  • [l10n] Branched as-daemon from version 1.21
  • [l10n] Commit from Jolla localization : 12 of 12 strings translated (0 need review).

    attr

  • Updated : 2.4.46-1.1.1 — 2.4.47-1.3.1
  • [packaging] Do not depent attr on libattr.
  • [packaging] Rename Source for tar_git:
  • [packaging] Revert to 2.4.47.
  • [packaging] Update attr to 2.4.48.

    audioflingerglue

  • Updated : 0.0.5-10.2.1.jolla — 0.0.7-1.4.3
  • [audioflinger] Droid 7.0 services with custom version.
  • [audioflingerglue] Figure out whether to use services extensions automatically.
  • [audioflingerglue] fix/simplify obs build (and simplify local build).
  • [audioflingerglue] add a custom services header, necessary for some android 5 devices.
  • [audioflingerglue] Add empty header as placeholder.
  • [audioflingerglue] allow building 32 bit miniafservice for 64 bit devices.
  • [packaging] Bump version.
  • [packaging] Use target specific config header.

    basesystem

  • Updated : 8.1-1.1.1 — 11+git1-1.3.1
  • [packaging] Minor formatting fix for source line.
  • [packaging] Move to tar_git packaging.
  • [update] Sync with upstream.

    bluez5

  • Updated : 5.47+git2-1.2.1 — 5.47+git6-1.5.1
  • [sailfish] avctp: Make avctp session reference counted.
  • [sailfish] backporting upstream fixes.
  • [sailfish] Enable mgmt tracing in tracing package.
  • [bluez5] Bluez claims connected when remote not paired.

    busybox

  • Updated : 1.21.0+git6-1.2.3 — 1.21.0+git8-1.3.4
  • Binaries added : busybox-symlinks-dosfstools – 1.21.0+git8-1.3.4
  • [packaging] Move dosfstools to separate package.
  • [iputils] Packag needed parts of iputils.
  • [mkfs.vfat] Add mkfs.vfat.
  • [time] Use time from busybox.

    commhistory-daemon

  • Updated : 0.8.13-1.2.1 — 0.8.14-1.3.6
  • [qt] Drop Qt gui dependency.

    commhistory-daemon-l10n

  • Updated : 1.55-10.3.1.jolla — 1.56.1-1.5.1
  • [l10n] Branched commhistory-daemon from version 1.56
  • [l10n] Commit from Jolla localization : 37 of 37 strings translated (0 need review).

    connectionagent-qt5

  • Updated : 0.11.33-1.2.1 — 0.11.34-1.3.5
  • [connectionagent] Add null check for all remote interface access.

    connman

  • Updated : 1.31+git51-1.4.1 — 1.32+git20-1.11.2
  • Unmet requirements: libxtables.so.12
  • [connman-vpn] Proper adding of default route for VPN.
  • [connman] Disconnect only connected VPNs.
  • [connman-vpn] Check if agent is present at VPN connect.
  • [connman-vpn] Set autoconnect on each connect request.
  • [connman] Fix memory leak in iptables extension.
  • [connman] Improve handling of iptables rule comments.
  • [connman-vpn] Prevent connecting VPN if not online.
  • [connman-vpn] Add default route if not defined.
  • [connman-vpn] Connect VPN after vpnd crash if autoconnect set.
  • [coverage] Remove *.gcda and *.gcno files on clean
  • [sailfish_ofono] Sync plugin and libgofonoext log levels
  • [connman] Use stored settings when creating a service from provider.
  • [connman-vpn] systemd: restart vpnd if aborted.
  • [connman] Connect to VPN if default service changes.
  • [vpn] Don’t call g_hash_table_remove with NULL argument.
  • [vpn] Handle stale task completions.
  • [connman-vpn] Implement proper VPN autoconnection support.
  • [connman] Sailfish iptables API support.
  • [unit] Added test-sailfish_iptables_ext to the coverage script
  • [connman-vpn] systemd: start connman-vpnd after connman.
  • [connman-vpn] Run VPN plugin binaries with configurable privileges.
  • [VPNBinary]
  • [connman-vpn] Add support for configurable user and groups to run VPN binary.
  • [unit] Added test-vpn-settings to the coverage script
  • [connman] Explicitely include <glib-object.h> where it’s needed. MER#1437</glib-object.h>
  • [connman] Additional headers to devel package for external VPN plugin development.
  • [connman] Cherry pick vpn patches.
  • [connman] Better support for external plugins.
  • [firewall] Fixed use-after-free in __connman_firewall_remove_rule
  • [gsupplicant] Roll back Sailfish OS specific patches. MER#1312
  • [connman] Updated baseline to 1.32
  • [rpm] Don’t even compile upstream wifi plugin. MER#1312
  • [wifi] Roll back all Sailfish OS specific changes in wifi plugin. MER#1312
  • [connman] Make offline mode change to require privileges (again).
  • [connman] Cherry-pick iptables patches from upstream.

    connman-qt5

  • Updated : 1.2.6-1.3.1 — 1.2.7-1.4.3
  • [connman-qt] Fix wrong parameter order.

    contactsd-l10n

  • Updated : 1.37-10.3.1.jolla — 1.38.1-1.5.1
  • [l10n] Branched contactsd from version 1.38
  • [l10n] Commit from Jolla localization : 5 of 5 strings translated (0 need review).

    csd

  • Updated : 0.11.0-10.4.1.jolla — 0.13.3-1.10.5
  • Unmet requirements: sailfish-settings-networking >= 0.4.15
  • [csd] Cleanup, Capitalize ids of qml elements properly, use const references for functions called from qml.
  • [csd] Use properties in calibration test
  • [validation] Match regular expression properly.
  • [validation] Print acceptance criteria of Bluetooth/WLAN mac addresses and Calibration String/Flag.
  • [csd] Show signal strength and satellite system.
  • [CSD] Show device screen resolution and touch point coordinates.
  • [build] Build requires ohm-ext-route.
  • [csd] Add handler for audio route.
  • [csd] Build AudioRoute.
  • [csd] Disable button if route is wrong.
  • [csd] Disable earpiece music Start button if route is wrong.
  • [csd] Disable headset music Start button if route is wrong.
  • [csd] Disable speaker music Start button if route is wrong.
  • [csd] Disable stereo speaker Start button if route is wrong.
  • [csd] Register AudioRoute to qml.
  • [csd] Remove fmradioiris implementation.
  • [csd] Set route types for recording tests.
  • [csd] Use Radio from QtMultimedia for FM Radio test.
  • [UsbCharging] Use ContextProperty for charger detection.
  • [csd] Fix shadow build with application SDK.
  • [csd] Hide Power SectionHeader in DeviceStatus page if there is nothing to show.
  • [csd] Validate Bluetooth and WLAN MAC address.
  • [csd] Verify calibration flag/string if the device has it.
  • [wlan] Use common API to get correct strength icon.
  • [csd] Bump all keepalive imports to current version.
  • [csd] Add Audio/UeventAccessory boolean setting value.
  • [csd] Add missing property definitions to hw settings.
  • [csd] Add UeventAccessory option to hw template.
  • [csd] Change macro to a bit more flexible one.
  • [csd] Do not expect to find device with uevent accessory.
  • [csd] Handle KEY_PLAYPAUSE as well in headset detect.
  • [csd] Load settings based on type prefix.
  • [csd] Refactor audio hw settings.
  • [csd] Refactor hw settings loading a bit.
  • [csd] Use semicolon for comments in hw settings template.
  • [fingerprint] Adapt to changed D-Bus interface.

    csd-l10n

  • Updated : 1.58-10.3.1.jolla — 1.63.1-1.6.1
  • [l10n] Branched csd from version 1.63
  • [l10n] Commit from Jolla localization : 484 of 484 strings translated (0 need review).
  • [tpl] translation templates update for 0.13.0
  • [tpl] translation templates update for 0.13.2
  • [tpl] translation templates update for 0.13.3
  • [l10n] Commit from Jolla localization : 471 of 482 strings translated (3 need review).
  • [tpl] translation templates update for 0.12.5
  • [l10n] Commit from Jolla localisation : 474 of 474 strings translated (0 need review).
  • [l10n] New files added from Jolla localization based on templates
  • [tpl] translation templates update for 0.11.1
  • [tpl] translation templates update for 0.12.2
  • [tpl] translation templates update for 0.12.3

    curl

  • Updated : 7.55.1-1.3.1 — 7.58.0-1.4.1
  • [curl] update curl to version 7.58.0
  • [curl] Update to 7.58.0. Fixes MER#1877

    dbuslog-tools

  • Updated : 1.0.10-1.3.1 — 1.0.11-1.3.1
  • [libdbuslog] Explicitely include <glib-object.h> where it’s needed. </glib-object.h>

    debootstrap

  • Updated : 1.0.53-2.2.1 — 1.0.53+mer1-10.2.3.jolla
  • [mer] Converted to tar_git packaging format.

    declarative-transferengine-qt5

  • Updated : 0.2.5-10.3.1.jolla — 0.3.5-1.5.5
  • [declarative-transferengine] Add empty view placeholder on sharing.
  • [declarative-transferengine] Add SharePage to qmldir.
  • [declarative-transferengine] Provide sharing page.
  • [declarative-transferengine] Support extra sharing options.
  • [sharing] Added add account button to all sharing views.
  • [sharing] Show account icon on sharing list.
  • [sharing] Use new transferMethods API.
  • [declarative-transferengine] Show pressed progressbar highlighted.
  • [declarative-transferengine] Do not enable transfers‘ view placeholder until model has finished.
  • [transfers] Adapt to ContextMenu API changes.
  • [declarative-transferengine] Don’t hardcode ProgressBar height.

    declarative-transferengine-qt5-l10n

  • Updated : 1.63-10.3.1.jolla — 1.75.1-1.8.1
  • [l10n] Branched declarative-transferengine-qt5 from version 1.75
  • [l10n] Commit from Jolla localization : 24 of 24 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.5
  • [l10n] Commit from Jolla localisation : 23 of 23 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.2
  • [l10n] Commit from Jolla localization : 22 of 23 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.6
  • [tpl] translation templates update for 0.2.8
  • [tpl] translation templates update for 0.3.1

    dosfstools

  • Updated : 3.0.10-6.6.1 — 3.0.10+git1-10.2.3.jolla
  • [mer] Migrated packaging from OBS-only to Git.

    droid-config-f5121

  • Updated : 0.6.1.1-10.4.3.jolla — 1.0.9-1.7.5
  • [ks] Calculate factory image size properly.
  • [ks] Include os and hw release files inside image zip.
  • [ks] Remove extra „-“ from release image name.
  • [f5121] Add sailfish img resize fix.
  • [f5121] Update submodule and remove 999-droid-system-bootdevice.rules.
  • [f5121] Add udev rule to ignore internal card.
  • [f5121] Enable PulseAudio usbaudio configs.
  • [performance] Improve HWC performance.
  • [zram] Enable zram swap.
  • [camera] Force autofocus mode for photos, and continuous for video.
  • [sailfish-fpd] Disable some quirks after fp hal update.
  • [config] Adjust peekfilter.
  • [f5122] Add modem config.
  • [f512x] Cleanup rpm dir to ease promotions
  • [f512x] Cleanup rpm dir to ease promotions. MER#1880
  • [systemCheck.d] Relax droid-hal-*.
  • [packaging] Add F5122 configs.
  • [patterns] Refactor for both SIM variants
  • [patterns] Require device specifi droid-system.
  • [sailfish-fpd] Add configuration file.
  • [f5121] Update upstream d-h-c.
  • [f5121] Use PulseAudio 11.1.
  • [ks] Update img2simg usage command.
  • [f5121] Use fingerprint daemon device lock.
  • [flashing] Improve version check.
  • [flashing] Make it possible to define blob path.
  • [ks] Take use of SAILFISH_CUSTOMER in image naming.
  • [f5121] Duck media streams less.
  • [f5121] Enable media notify for alarm.
  • [f5121] Update upstream d-h-c.
  • [ks] Use os-release.
  • [patterns] Drop apkd-configs-home.
  • [ks] Make releasename more tolerant for errors.
  • [f5121] Add mce memnotify limits.
  • [camera] Support ISO 1600.
  • [f5121] Use native vibrator.

    droid-config-l500d

  • Updated : 0.12.0-10.3.4.jolla — 0.13.0-1.5.5
  • [codecs] Add symlink for newer media_codecs_performance.xml codec definition file, as some adaptations crash if these files are missing.
  • [configs] Classify fmradio loopback source as player.
  • [configs] Depend on jolla-devicelock-daemon-encsfa by default.
  • [configs] Split policy earpiece configuration.
  • [configs] Update bluez5 arguments for PulseAudio 11.1.
  • [configs] Update loopback arguments for PulseAudio 11.1.
  • [dcd] Update upstream dcd submodule.
  • [ks] Add SAILFISH_CUSTOMER to os-release for image builds.
  • [ks] Do not attach os-release, now available from ssu-repos.
  • [l500d] Use dcd xpolicy.conf, so that proper FM radio config is used.
  • [patterns] Add sd-utils for sd card support
  • [systemCheck.d] Relax droid-hal-*.
  • [l500d] Update img2simg binary name.
  • [dcd] Update upstream for SAILFISH_CUSTOMER.
  • [ks] Take use of SAILFISH_CUSTOMER in image naming.
  • [ks] Use os-release.
  • [l500d] Update PulseAudio configs to upstream style.
  • [l500d] Update PulseAudio policy configs.
  • [l500d] Update upstream d-h-c submodule.
  • [l500d] Remove patterns and use meta packages.
  • [ks] Make build more tolerant for errors.

    droid-config-tbj

  • Updated : 0.8.0-10.3.4.jolla — 0.9.2-1.4.13
  • Binaries added : droid-config-tbj-bluez5 – 0.9.2-1.4.13, droid-config-tbj-bluez4 – 0.9.2-1.4.13
  • Unmet requirements: tbj-bluez-configs
  • [tbj] Update upstream d-h-c.
  • [tbj] Use PulseAudio 11.1.
  • [ks] Change img2simg to img2simg-old.
  • Sync with upstream audio changes.

  • [ks] Update .ks template.
  • [packaging] Sync with upstream submodule.
  • Update alarm media notify.

  • Update media volume ducking.

  • [ks] Make releasename more tolerant for errors.
  • [tbj] Remove patterns and use meta packages.
  • [silica] Add config for extra small button width.

    droid-hal-f5121

  • Updated : 0.3.6-10.4.2.jolla — 0.3.8-10.3.1.jolla
  • [system-core] Remove /sbin from droid PATH.
  • [dhd] avoid incorrect usage of Android GPS HAL in certain cases. MER#1871

    droid-hal-f5121-img-boot

  • Updated : 3.10.84.20170220.1-10.2.6.jolla — 3.10.84.20180404.1-1.4.3
  • [f5121] Add zram.num_devices inside kernel cmdline.
  • [kernel] Relax dependency to droid-config-flashing package.
  • [recovery] Relax dependency to droid-config-flashing package.
  • [f5121] Add an option to clear external storage to device reset.

    droid-hal-l500d-img-boot

  • Updated : 3.10.49.20170324.1-10.2.5.jolla — 3.10.49.20180206.1-1.3.4
  • [l500d] Add an option to clear external storage to device reset.

    droid-hal-prjconf-f5121

  • Updated : 0.0.3-10.1.1.jolla — 0.0.4-1.3.3
  • [prjconf] Drop explicit prefer for f512x.

    droid-hal-tbj-img-boot

  • Updated : 3.10.20.20170324.1-10.2.3.jolla — 3.10.20.20180206.1-1.3.1
  • [tbj] Add an option to clear external storage to device reset.

    droid-hal-version-f5121

  • Updated : 0.0.1-10.2.8.jolla — 0.2.1-1.2.20
  • [version] More deps.
  • [packaging] More explicit package deps.
  • [packaging] Move common.inc out of rpm dir.
  • [f512x] Fix build. MER#1880
  • [f5121] Refactor common parts
  • [f5122] Add Xperia X Dual SIM. MER#1880
  • [version] More detailed version deps for packages.
  • [dvd] Update latest upstream version
  • [dvd] Use native vibrator.

    droid-system-f5121

  • Updated : 0.2-10.3.3.jolla — 0.4.2-1.2.2
  • Binaries added : droid-system-f512x – 0.4.2-1.2.2
  • Unmet requirements: droid-system-f512x
  • [f5121] libpdfium.so is needed for camera to function. MER#1887
  • [packaging] Fix script location.
  • [f5121] Fix delete_system.list path.
  • [f5121] Separate common files to f512x package.
  • [f5121] Delete iptables and ip6tables droid binaries.
  • [f5121] Remove unused files. MER#1887

    droid-system-l500d

  • Updated : 0.0.28-10.1.1.jolla — 0.0.29-1.3.6
  • [droid-system] Remove iptables and ip6tables droid binaries.

    droid-tools

  • Updated : 0.0.3-10.1.1.jolla — 0.0.4-10.2.3.jolla
  • Binaries added : droid-tools-imager – 0.0.4-10.2.3.jolla
  • [imager] Add sub package to include img2simg.

    droidmedia

  • Updated : 0.20171205.1-10.4.1.jolla — 0.20180406.1-1.8.4
  • [sony] Hardcode the QCOM colour constant.
  • [codec] Pass codec colour format to gst-droid.
  • [camera] Move PermissionController and AppOps back to minisf on Android 4 devices.
  • [env] Append to the env.mk rather than replace it.
  • [minisf] Package MiniSurfaceFlinger into a shared lib that can be invoked from hwcomposer-plugin in lipstick.
  • Fix SimpleDecodingSource for video.

  • [32bit] Add rpm macro and env var to specify 32bit build on 64bit systems.
  • [bsp] Android 7.0 support.
  • [droidmedia] add a custom services header, necessary for some android 5 devices.
  • [droidmedia] use custom services header if custom functions are present.
  • [build] The env.sh should always be present, and should be a .mk file
  • [build] Put env in temporary file to be included by droid mk.
  • [camera] Add possibility to force use of camera HAL version.
  • [recorder] Support kMetadataBufferTypeNativeHandleSource for older HALs.

    dsme

  • Updated : 0.78.2.1-1.3.1 — 0.79.2-1.5.1
  • [batterytracker] Fix logging format strings.
  • [batterytracker] Block battery empty shutdown during bootup.
  • [batterytracker] Expose battery level within DSME.
  • [batterytracker] Track battery state via MCE D-Bus interface.
  • [dsme-server] Write –help to stdout
  • [logging] Fix typo
  • [logging] Use eventfd instead of semaphore
  • [state] Allow cancellation of battery empty shutdown.
  • [dsme] Make dsme message type identifiers unique.
  • [dsme-wdd] Do not close watchdog file descriptors when daemonizing. Fixes MER#1870
  • [dsme-wdd] Update authors list
  • [iphb] Take release time stamp from /etc/os-release.
  • [iphb] Update hardcoded minimum system time.

    embedlite-components-qt5

  • Updated : 1.19.30-10.3.1.jolla — 1.19.31-1.4.2
  • [embedlite-components] Ensure that download is stopped and any partial data removed.
  • [mer][embedlite-components] Ensure that download is stopped and any partial data removed.

    eventsview-extensions

  • Updated : 0.0.34-10.3.1.jolla — 0.1.0-1.4.8
  • [eventsview-extension] Adapt to jolla-lipstick property name change.

    eventsview-extensions-l10n

  • Updated : 1.19-10.3.1.jolla — 1.20.1-1.4.1
  • [l10n] Branched eventsview-extensions from version 1.20
  • [l10n] Commit from Jolla localisation : 15 of 15 strings translated (0 need review).

    expect

  • Updated : 5.45-1.1.1 — 5.45+mer1-10.2.3.jolla
  • [mer] Converted to tar_git packaging format.

    feature-alien

  • Updated : 0.0.2-10.2.1.jolla — 0.1.0-1.3.4 Binaries removed : feature-alien-patterns
  • [repo] Use variant instead of model.
  • [pattern] Remove feature-alien pattern.

    feature-eas

  • Updated : 0.0.10-10.2.1.jolla — 0.0.11-1.3.4 Binaries removed : feature-eas-patterns
  • [pattern] Remove feature-eas pattern.

    fontconfig

  • Updated : 2.12.4-1.1.1 — 2.12.4-1.3.1
  • [packaging] Require fontpackages-filesystem.

    geoclue-provider-hybris

  • Updated : 0.2.15-10.3.2.jolla — 0.2.16-1.4.35
  • [geoclue-providers-hybris] don’t fail if /system/etc/gps.conf is missing.
  • [geoclue-providers-hybris] remove certain groups from the setgroups call in order to avoid confusing the BSP.

    geoclue-provider-mlsdb

  • Updated : 0.0.14-1.2.1 — 0.0.15-1.3.5
  • [geoclue-provider-mlsdb] Adjust to changed ofono API.
  • [geoclue-provider-mlsdb] Do not request a location update with either incorrect or no information.
  • [geoclue-provider-mlsdb] Do not request a location update with empty data.

    git

  • Updated : 1.8.3-4.4.1 — 1.8.3+mer2-10.2.5.jolla
  • [mer] Removed Requires rsync.
  • [ew: minor style changes and manpage merge fix]
  • [jc: backported for 1.6.5 maint before advice_commit_before_merge]
  • [jes: I merged the later patches to that end.]
  • [mer] Converted to tar_git packaging format.
  • [PATCH] gitk: Heed the lines of context in merge commits
  • [PATCH] git-mergetool: Allow gvimdiff to be used as a mergetool – Update to 1.6.1.3

    gnupg2

  • Updated : 2.0.4-1.1.2 — 2.0.4-1.3.1
  • Binaries added : gnupg2-doc – 2.0.4-1.3.1
  • [aarch64] Autoreconf before build.
  • [build] Remove unnecessary files that we don’t want to bundle.
  • [gnupg] Change git submodule. Contributes to MER#1748

    gobject-introspection

  • Updated : 1.48.0-1.2.1 — 1.48.0-1.3.1
  • [build] fix submodule patch
  • [gobject-introspection] Fix git submodule.

    gpgme

  • Updated : 1.2.0-1.1.1 — 1.2.0+git1-1.3.1
  • [gpgme] Don’t hardcode requirement on GnuPG version, contributes MER#1780.
  • [gpgme] Make the %post and %postun rule not to fail, contributes to MER#1780.
  • [gpgme] Switch to git submodule.
  • [gpgme] Switch to submodule storage, contributes to MER#1780.

    gstreamer1.0

  • Updated : 1.10.4-1.1.2 — 1.10.4+git2-1.3.1
  • [buffering] Add deactivate_max_size_time.patch.

    gstreamer1.0-droid

  • Updated : 0.20171129.1-10.4.1.jolla — 0.20180416.1-1.7.2
  • [camera] Support „iso-speed“ ISO setting variant.
  • [recorder] Set a realistic timestamp on the audio buffer.
  • [vdec] Fix colour conversion on MTK.
  • [i420] Re-enable i420 blob when buffers don’t match.
  • [camera] Fix framerate selection.

    gstreamer1.0-plugins-bad

  • Updated : 1.10.4-1.1.2 — 1.10.4+git1-1.3.1
  • Unmet requirements: libwebp.so.7
  • [webp] Enable WebP plugin.

    htop

  • Updated : 1.0.1-1.1.1 — 2.0.2+git4-10.2.5.jolla
  • Binaries added : htop-desktop – 2.0.2+git4-10.2.5.jolla
  • [packaging] Default to normal behaviour. MER#1847
  • [htop] Package version 2.0.2. Fixes MER#1847
  • [packaging] Have fingerterm requirement in correct package.
  • [htop] Package version 2.0.2. Fixes MER#1847
  • [packaging] Split desktop file to own package.
  • [packaging] initial packaging of htop 2.0.2.
  • [packaging] Require python for building.
  • [packaging] Show better defaults in FingerTerm.

    hunspell

  • Updated : 1.2.8.5-1.1.3 — 1.6.2-1.3.4
  • Binaries added : hunspell-tools – 1.6.2-1.3.4
  • [hunspell] Update to 1.6.2, add static library to development package. Fixes MER#1882

    initrd-helpers

  • Updated : 0.1.6-10.1.1.jolla — 0.1.7-1.3.4
  • [factory-reset] Add a script for re-formatting external media on factory reset.

    iptables

  • Updated : 1.4.15-1.1.2 — 1.6.1+git1-1.3.1
  • Unmet requirements: libxtables.so.12
  • [packaging] Drop .yaml.
  • [packaging] Update to version 1.6.1.

    jolla-alarm-ui-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    jolla-alarm-ui-l10n

  • Updated : 1.46-10.3.1.jolla — 1.47-1.4.3
  • [l10n] Commit from Jolla localization : 20 of 20 strings translated (0 need review).

    jolla-calculator

  • Updated : 0.2.15-10.2.1.jolla — 0.2.17-1.3.5
  • [calculator] Fix tablet size portrait to center content.
  • [jolla-calculator] Allow copying calculation results.

    jolla-calculator-all-translations

  • Updated : 0.4.4-10.4.2.jolla — 0.5.0-1.4.2
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    jolla-calculator-l10n

  • Updated : 1.50-10.3.1.jolla — 1.57.1-1.7.1
  • [l10n] Branched jolla-calculator from version 1.57
  • [l10n] Commit from Jolla localization : 4 of 4 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.17
  • [l10n] Commit from Jolla localisation : 3 of 4 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.16

    jolla-calendar

  • Updated : 0.6.31-10.2.1.jolla — 0.7.3-1.5.7
  • [calendar] Use common sharing page.
  • [calendar] Capitalize section header consistently with first letter only.
  • [calendar] Capitalize weekdays on events view widget.
  • [calendar] Servicefilters for add account button.
  • [sailfish-calendar] Extend calendar components for meeting invitation responses.
  • [jolla-calendar] Try to fit tablet landscape to available height.
  • [calendar] Add visual indication to pull down menu while sync is ongoing.
  • [jolla-calendar] Move sharing options to own page.
  • [calendar] Make event start/end times use one line if content fits.
  • [jolla-calendar] Try to open day view in meaningful time.

    jolla-calendar-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    jolla-calendar-l10n

  • Updated : 1.113-10.3.1.jolla — 1.126.1-1.8.1
  • [l10n] Branched jolla-calendar from version 1.126
  • [l10n] Commit from Jolla localisation : 91 of 91 strings translated (0 need review).
  • [tpl] translation templates update for 0.7.5
  • [l10n] Commit from Jolla localization : 80 of 91 strings translated (0 need review).
  • [tpl] translation templates update for 0.7.3
  • [l10n] Commit from Jolla localisation : 80 of 91 strings translated (0 need review).
  • [tpl] translation templates update for 0.7.2
  • [l10n] Commit from Jolla localization : 82 of 91 strings translated (0 need review).
  • [tpl] translation templates update for 0.7.1
  • [l10n] Commit from Jolla localization : 92 of 92 strings translated (0 need review).
  • [tpl] translation templates update for 0.6.36
  • [tpl] translation templates update for 0.7.0
  • [l10n] Commit from Jolla localization : 82 of 82 strings translated (0 need review).
  • [tpl] translation templates update for 0.6.32
  • [tpl] translation templates update for 0.6.35

    jolla-camera

  • Updated : 0.4.31-10.3.1.jolla — 0.4.38-1.6.4
  • [camera] Fix zoomed images not being reset when existing camera roll.
  • [camera] Replace opacity values with proper color properties.
  • [camera] Don’t allow device switch when capture is busy.
  • [jolla-camera] Align return to viewfinder button with dismiss button style.
  • [jolla-camera] Move to new image viewer design.
  • [camera] Remove hardcoded framerates so defaults are used.
  • [camera] Support camera with different framerrates.
  • [camera] Replace hard-coded iso value icons with icon+text.

    jolla-camera-l10n

  • Updated : 1.142-10.3.1.jolla — 1.145.1-1.5.1
  • [l10n] Branched jolla-camera from version 1.145
  • [l10n] Commit from Jolla localization : 48 of 48 strings translated (0 need review).
  • [tpl] translation templates update for 0.4.32
  • [tpl] translation templates update for 0.4.33
  • [tpl] translation templates update for 0.4.34
  • [tpl] translation templates update for 0.4.36

    jolla-clock

  • Updated : 0.4.9-10.3.1.jolla — 0.4.11-1.4.5
  • [clock] Adapt to changed ContextMenu API.
  • [clock] Don’t format 1999 milliseconds as 01.00.

    jolla-clock-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    jolla-clock-l10n

  • Updated : 1.91-10.3.1.jolla — 1.92-1.4.3
  • [l10n] Commit from Jolla localization : 38 of 38 strings translated (0 need review).

    jolla-common-configurations

  • Updated : 0.7.16-10.1.1.jolla — 0.8.5-1.5.2
  • [feedback] Add vibration on device unlock.
  • [systemCheck] Require meta package of ssu-vendor-data.
  • [ngfd] Use pulldown_highlight sample for push_gesture.
  • [base-jolla-common-configuration] Add vibra feedback event.
  • [ngfd] Disable unlock sound.
  • [ngfd] Update NGFD event and plugin configs.

    jolla-contacts

  • Updated : 0.5.13-10.3.1.jolla — 0.5.19-1.7.5
  • [contacts] Change Jolla string to generic device string.
  • [contacts] Don’t return to main page until sharing is done.
  • [jolla-contacts] Fix crash upon Contact detail context menu closing.
  • [jolla-contacts] Adapt to changed Context Menu API.
  • [contacts] Remove dependency for long dead google plugin package.

    jolla-contacts-l10n

  • Updated : 1.126-10.3.1.jolla — 1.132.2-1.8.1
  • [l10n] Commit from Jolla localization : 154 of 154 strings translated (0 need review).
  • [l10n] Branched jolla-contacts from version 1.132
  • [l10n] Commit from Jolla localization : 152 of 154 strings translated (0 need review).
  • [tpl] translation templates update for 0.5.19
  • [l10n] Commit from Jolla localisation : 152 of 154 strings translated (0 need review).
  • [tpl] translation templates update for 0.5.14
  • [tpl] translation templates update for 0.5.16
  • [tpl] translation templates update for 0.5.17
  • [tpl] translation templates update for 0.5.18

    jolla-developer-mode

  • Updated : 0.5.0-10.3.1.jolla — 0.5.1-1.4.8
  • [jolla-developer-mode] Whitelist BROWSER.

    jolla-devicelock

  • Updated : 0.2.14-10.2.1.jolla — 0.2.18-1.5.9
  • [jolla-devicelock] Don’t reset sideloading value when turning off lock code.
  • [devicelock] Fix authentication failures when device lock is not in use.
  • [mdm] Allow mdm clients to provide a reason for a lockout.
  • [devicelock] Verify the PID of the authenticating application.

    jolla-email

  • Updated : 0.3.29-10.3.1.jolla — 0.3.39-1.5.5
  • [email] Clean up email composer usage.
  • [jolla-email] Add remorse for discarding a composited email.
  • [jolla-email] Unable to forward message with multiple non-downloaded attachments.
  • [jolla-email] Do not reuse MessageView.
  • [jolla-email] Reload HtmlViewer always when needed.
  • [email] Show attachment download progress and revisit its UI.
  • [jolla-email] Highlight progressbar when pressed.
  • [jolla-email] Don’t reply to yourself when choosing to reply to a message you sent.
  • [jolla-email] Make difference between downloaded and saved attachments.
  • [email] Adapt to needless empty space removed from ProgressBar.
  • [jolla-email] Improve unsupported attachment error notification.
  • [jolla-email] Add identifier back for the attachments page’s thumbnail.

    jolla-email-all-translations

  • Updated : 0.4.4-10.3.2.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    jolla-email-l10n

  • Updated : 1.147.3-10.4.1.jolla — 1.160.1-1.8.1
  • [l10n] Branched jolla-email from version 1.160
  • [l10n] Commit from Jolla localisation : 151 of 151 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.41
  • [tpl] translation templates update for 0.3.43
  • [l10n] Commit from Jolla localization : 151 of 151 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.39
  • [l10n] Commit from Jolla localization : 151 of 151 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.38
  • [l10n] Commit from Jolla localization : 150 of 150 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.37
  • [l10n] Commit from Jolla localisation : 149 of 150 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.33
  • Updated : 0.2.8-10.2.2.jolla — 0.2.14-1.4.8
  • Remove obsolete extension translation loading.

  • [jolla-gallery] Add dbus interface for opening a single file.
  • [jolla-gallery] Replace split view with overlay controls.
  • [jolla-gallery] Add tiff and webp image handlers.
  • [jolla-gallery] Return to first page when model cleared.
  • [jolla-gallery] Register video/3gpp mime type.
  • Adapt to changed contextmenu api.

  • Updated : 1.79-10.3.1.jolla — 1.85.1-1.6.1
  • [l10n] Branched jolla-gallery-ambience from version 1.85
  • [l10n] Commit from Jolla localization : 34 of 34 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.6
  • [l10n] Commit from Jolla localization : 33 of 33 strings translated (0 need review).
  • Updated : 0.0.11-10.2.1.jolla — 0.2.2-1.4.3
  • Binaries added : jolla-gallery-extensions – 0.2.2-1.4.3 Binaries removed : jolla-gallery-extensions-ts, jolla-gallery-extensions-common
  • Unmet requirements: jolla-gallery-extensions = 0.2.2-1.4.3
  • [gallery-extension] Adapt to Nemo.DBus 2.0.
  • [packaging] Fix obsoltes/provides.
  • [gallery-extensions] Simplify packaging.
  • [jolla-gallery-extensions] Move to new image viewer design.
  • Updated : 1.19-10.3.1.jolla — 1.27-1.7.3
  • [l10n] Commit from Jolla localization : 13 of 13 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.0
  • [l10n] Commit from Jolla localization : 13 of 13 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.0
  • Updated : 0.1.1-10.2.1.jolla — 0.1.3-1.3.3
  • [gallery-facebook] Fix comment page and localization issues etc.
  • [jolla-gallery-facebook] Move to new image viewer design.
  • Updated : 1.51-10.3.1.jolla — 1.56.1-1.6.1
  • [l10n] Branched jolla-gallery-facebook from version 1.56
  • [l10n] Commit from Jolla localisation : 14 of 14 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.2
  • [tpl] translation templates update for 0.1.3
  • Updated : 1.104-10.3.1.jolla — 1.109.1-1.7.1
  • [l10n] Branched jolla-gallery from version 1.109
  • [l10n] Commit from Jolla localization : 13 of 13 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.14
  • [l10n] Commit from Jolla localization : 13 of 13 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.13
  • [tpl] translation templates update for 0.2.9

    jolla-keyboard

  • Updated : 0.6.15-10.4.1.jolla — 0.6.19-1.5.5
  • [jolla-keyboard] Replace emojis unsupported by Alien with more common ones.
  • [jolla-keyboard] Remove extra symbol after smiling and sad emojis.
  • [jolla-keyboard] Add emoji keyboard.
  • [jolla-keyboard] Use proper stream-restore id for sounds.

    jolla-keyboard-l10n

  • Updated : 1.41-10.3.1.jolla — 1.47.1-1.6.1
  • [l10n] Branched jolla-keyboard from version 1.47
  • [l10n] Commit from Jolla localization : 15 of 17 strings translated (0 need review).
  • [tpl] translation templates update for 0.6.17

    jolla-mediaplayer

  • Updated : 0.3.23-10.3.1.jolla — 0.3.28-1.4.5
  • [mediaplayer] Used „Play queue“ on pulley menu instead of song metadata .
  • [mediaplayer] Fix error messages lacking space between message parts.
  • [mediaplayer] Advance a track on call button double click.
  • [mediaplayer] Unshuffle a playlist correctly when the last item is selected.
  • [media] Extend one song rewind behavior to cover Bluetooth.
  • [media] Fix playing of externally requested audio clip.
  • [media] Fix playing of externally requested audio clip.

    jolla-mediaplayer-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    jolla-mediaplayer-l10n

  • Updated : 1.84-10.3.1.jolla — 1.93.1-1.7.1
  • [l10n] Branched jolla-mediaplayer from version 1.93
  • [l10n] Commit from Jolla localisation : 64 of 64 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.24
  • [tpl] translation templates update for 0.3.25
  • [tpl] translation templates update for 0.3.28

    jolla-mediaplayer-radio

  • Updated : 0.1.14-10.2.1.jolla — 0.1.15-1.3.5
  • [mediaplayer-radio] Update channel list after removing favourite.

    jolla-mediaplayer-radio-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    jolla-mediaplayer-radio-l10n

  • Updated : 1.43-10.3.1.jolla — 1.44-1.4.3
  • [l10n] Commit from Jolla localisation : 11 of 11 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.15

    jolla-messages

  • Updated : 0.6.62-10.3.1.jolla — 0.6.66-1.7.5
  • [messages] Use proper copy to gallery sharing icon.
  • [messages] Move MMS saving action to sharing page.
  • [messages] Adapt to changed ContextMenu API.
  • [mms] Replace MMS image viewer split view with gallery overlay.

    jolla-messages-l10n

  • Updated : 1.130-10.3.1.jolla — 1.135.1-1.6.1
  • [l10n] Branched jolla-messages from version 1.135
  • [l10n] Commit from Jolla localization : 89 of 89 strings translated (0 need review).
  • [tpl] translation templates update for 0.6.63
  • [tpl] translation templates update for 0.6.65

    jolla-notes

  • Updated : 0.9.7-10.3.1.jolla — 0.9.10-1.5.5
  • [notes] Use common sharing page.
  • [notes] Adapt to changed ContextMenu API.
  • [Notes] Add account button filters added.
  • [Notes] Add account button on NoteSharePage.

    jolla-notes-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    jolla-notes-l10n

  • Updated : 1.68-10.3.1.jolla — 1.69-1.4.3
  • [l10n] Commit from Jolla localisation : 19 of 19 strings translated (0 need review).
  • [tpl] translation templates update for 0.9.10
  • [tpl] translation templates update for 0.9.8

    jolla-sessions-qt5

  • Updated : 1.1.8-10.1.1.jolla — 1.1.11-1.3.2
  • [jolla-sessions] Disable logging autologind errors to journalctl.
  • [jolla-sessions] Don’t use deprecated systemd package config.
  • [user-session] Make the autologin process act as a booster.

    jolla-settings

  • Updated : 0.12.35-10.3.1.jolla — 0.12.37-1.4.15
  • Unmet requirements: liblipstick-qt5.so.0
  • [wlan] Add DBus method for launching add network dialog.
  • [jolla-settings] Don’t register signon ui to main d-bus service.

    jolla-settings-accounts

  • Updated : 0.3.33.1-10.4.1.jolla — 0.3.39-1.6.9
  • [settings-accounts] Add developer mode service type for Jolla provider.
  • [packaging] Bump up version
  • [settings-accounts] Move „Add account“ after accounts flow.
  • [accounts] Change Jolla string to general string.
  • [settings-accounts] Use PasswordField for passwords.
  • [jolla-settings-accounts] Update Facebook redirect URI.
  • [localization] Remove colons from combobox labels, not used in Sailfish-style.
  • [settings-accounts] Fix opacity binding from account busy dialog.

    jolla-settings-accounts-l10n

  • Updated : 1.172-10.3.1.jolla — 1.180.1-1.7.1
  • [l10n] Branched jolla-settings-accounts from version 1.180
  • [l10n] Commit from Jolla localization : 337 of 338 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.38
  • [l10n] Commit from Jolla localization : 319 of 338 strings translated (18 need review).
  • [tpl] translation templates update for 0.3.36
  • [tpl] translation templates update for 0.3.37
  • [l10n] Commit from Jolla localisation : 337 of 338 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.35

    jolla-settings-bluetooth

  • Updated : 0.1.9-10.2.1.jolla — 0.1.10-1.3.3
  • [settings-bluetooth] Don’t change pulldown menu text while hiding.

    jolla-settings-bluetooth-l10n

  • Updated : 1.77-10.3.1.jolla — 1.80.1-1.5.1
  • [l10n] Branched jolla-settings-bluetooth from version 1.80
  • [l10n] Commit from Jolla localization : 13 of 13 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.10

    jolla-settings-l10n

  • Updated : 1.63-10.3.1.jolla — 1.65.1-1.5.1
  • [l10n] Branched jolla-settings from version 1.65
  • [l10n] Commit from Jolla localization : 9 of 9 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.37

    jolla-settings-networking

  • Updated : 0.4.11-10.3.1.jolla — 0.4.20-1.8.3
  • Binaries added : sailfish-settings-networking-vpn-example – 0.4.20-1.8.3, sailfish-settings-networking – 0.4.20-1.8.3
  • Unmet requirements: sailfish-settings-networking
  • [jolla-settings-networking] Indicate which VPN handles auto reconnect.
  • [jolla-settings-networking] Remove VPN Beta label.
  • [networking] Adapt to changed ContextMenu API.
  • [jolla-settings-vpn] Don’t pass around obsolete automaticUpDown.
  • [jolla-settings-vpn] Fix details page to show correct autoConnect status.
  • [packaging] Update version and requirements.
  • [packaging] Update version and requirements.
  • [settings-networking] Cleanup VPN settings page.
  • [wlan] Rewrite WLAN settings form, share with Connection Dialog.
  • [vpn] Dynamically load VPN type-specific settings.
  • [jolla-settings-networking] Respect FlightModeToggleEnabled policy.
  • [jolla-settings-networking] Ask user to select mobile data SIM if he tries to activate mobile data switch.

    jolla-settings-networking-l10n

  • Updated : 1.196-10.3.1.jolla — 1.214.1-1.9.1
  • [l10n] Branched jolla-settings-networking from version 1.214
  • [l10n] Commit from Jolla localisation : 397 of 397 strings translated (0 need review).
  • [tpl] translation templates update for 0.4.20
  • [l10n] Commit from Jolla localization : 398 of 398 strings translated (0 need review).
  • [tpl] translation templates update for 0.4.17
  • [l10n] Commit from Jolla localization : 346 of 401 strings translated (13 need review).
  • [tpl] translation templates update for 0.4.16
  • [l10n] Commit from Jolla localization : 375 of 375 strings translated (0 need review).
  • [tpl] translation templates update for 0.4.15
  • [l10n] Commit from Jolla localization : 374 of 375 strings translated (1 need review).
  • [tpl] translation templates update for 0.4.14
  • [l10n] Commit from Jolla localization : 375 of 375 strings translated (0 need review).
  • [tpl] translation templates update for 0.4.11
  • [tpl] translation templates update for 0.4.13

    jolla-settings-sailfishos

  • Updated : 0.1.12-10.3.1.jolla — 0.1.14-1.4.12
  • [settings-sailfishos] Use delayedClick instead of custom code.
  • [os-upgrade] Inform user if upgrading OS requires SSU registration.

    jolla-settings-sailfishos-l10n

  • Updated : 1.70-10.3.1.jolla — 1.72.1-1.5.1
  • [l10n] Branched jolla-settings-sailfishos from version 1.72
  • [l10n] Commit from Jolla localisation : 53 of 53 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.16
  • [l10n] Commit from Jolla localisation : 49 of 53 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.13
  • [tpl] translation templates update for 0.1.14

    jolla-settings-sdk

  • Updated : 0.21-10.3.1.jolla — 0.23-1.4.18
  • [sdk] Added pkgconfig(systemsettings) to BuildRequires.
  • [deploy] require sdk-deploy-rpm in installation.
  • [sdk] add button needed by PinInput.qml
  • [sdk] Add lockscreen, events and about to the project file
  • [sdk] add pininput.qml to make devicelock ui work.
  • [sdk] another try with button enabling.
  • [sdk] Converted to regular git branch of ui-jolla-settings-system.
  • [sdk] developer mode integrated and device lock disabled from view.
  • [sdk] developer mode name changed to developer settings.
  • [sdk] developer mode pro file name change.
  • [sdk] disable button for password setting.
  • [sdk] disable save button if password is empty.
  • [sdk] Fix the names of settings categories
  • [sdk] flow works, need to polish the ui tomorrow.
  • [sdk] put developer mode into build chain
  • [sdk] qml side with signals work.
  • [sdk] Rebased onto ui-jolla-settings-system v0.36.50.
  • [sdk] refresher emits signal on success and that is caught at qml.
  • [sdk] refresher now talks to packagekit.
  • [sdk] remove update mgmt ui
  • [sdk] repository refresher first version.
  • [sdk] Sync with jolla-settings-system 0.3.41.1 (upgrade-1.1.9)
  • [sdk] Update category placeholders and translations.
  • [sdk] update qmldir for PinInput
  • [sdk] workaround for qml method name restriction.
  • [sdk] add qmldir for plugin and qml’s needed fro time setting.
  • [sdk] add translations also to git.
  • [sdk] remove /etc/location bits
  • [settings-sdk] Sync with jolla-settings-system 0.6.0.

    jolla-settings-sync-l10n

  • Updated : 1.47-10.3.1.jolla — 1.48.1-1.5.1
  • [l10n] Branched jolla-settings-sync from version 1.48
  • [l10n] Commit from Jolla localisation : 23 of 23 strings translated (0 need review).

    jolla-settings-system

  • Updated : 0.12.8.1-10.4.3.jolla — 0.36.56-1.11.4
  • [settings-system] Fix pin change.
  • [settings-developermode] Make developer toggle always visible.
  • [settings-system] Don’t talk about PIN when it’s security code.
  • [jolla-settings-system] Bind developer mode’s intermiate busy state to developer status.
  • [settings-system] Refresh developer mode status after SSU is registered.
  • [settings-system] Replace opacity values with proper color properties.
  • [settings-system] Change opacity values with proper color properties.
  • [homescreen] Don’t indiscriminately steal focus on device lock feedback.
  • [jolla-settings-system] Adapt to changed ContextMenu API.
  • [jolla-settings-devicelock] Adapt to changed ContextMenu API.
  • [devicelock] Add enablers for system dialog device lock authentication.
  • [storage] Show SDK data separately.
  • [fingerprint] Hide unimplemented fingerprint rename action.
  • [storage] Split android runtime out of Sailfish OS.
  • [settings-system] Avoid unnecessary notification categories.
  • [settings-system] Make header capitalization consistent.
  • [developermode] Find the provider of the developer mode service.
  • [settings-storage] Adapt to changed ContextMenu API.
  • [settings-storage] Change storage mount/unmount to use udisks2.
  • [settings-storage] Mount/Unmount only after context menu is closed.
  • [developermode] Add remorse to Enable developer updates switch.
  • [developermode] Improve UI for enabling/disabling developer mode.
  • [developermode] Remove jolla account checks for enabling developer mode.
  • [developermode] Update dependencies.
  • [fingerprint] Don’t flicker fingerprint graphic to white on startup.
  • [display] Hide autobrightness if device has no light sensor.
  • [developermode] Request device lock when removing developer mode.
  • [settings-system] Move some items under new „security“ section.
  • [settings-storage] Add Android data dirs to Storage only if Android support installed.
  • [settings-storage] Fix reference error from disk usage page.
  • [settings-system] Show OS name based on os-release file.
  • [developermode] Inform user if enabling developer mode requires SSU registration.
  • [languages] Format to name Chinese languages: Chinese {simplified|traditional} (Region)
  • [settings-system] Add Chinese(Taiwan),Czech,Dutch,Greek,Estonian,Hungarian,Portuguese(Brazil),Slovenian,and Turkish selection.
  • [translations] Drop colon from Combobox label translation examples.
  • [settings-system] Remove connection to slot that doesn’t exit.

    jolla-settings-system-l10n

  • Updated : 1.263.3-10.4.1.jolla — 1.288.1-1.9.1
  • [l10n] Branched jolla-settings-system from version 1.288
  • [l10n] Commit from Jolla localisation : 470 of 470 strings translated (0 need review).
  • [tpl] translation templates update for 0.36.55
  • [l10n] Commit from Jolla localisation : 463 of 470 strings translated (4 need review).
  • [tpl] translation templates update for 0.36.50
  • [tpl] translation templates update for 0.36.51
  • [tpl] translation templates update for 0.36.53
  • [tpl] translation templates update for 0.36.54
  • [l10n] Commit from Jolla localization : 403 of 470 strings translated (19 need review).
  • [tpl] translation templates update for 0.12.25
  • [l10n] Commit from Jolla localisation : 473 of 473 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.23
  • [tpl] translation templates update for 0.12.24
  • [l10n] Commit from Jolla localisation : 472 of 472 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.22
  • [l10n] Commit from Jolla localisation : 457 of 471 strings translated (4 need review).
  • [tpl] translation templates update for 0.12.21
  • [l10n] Commit from Jolla localization : 460 of 471 strings translated (3 need review).
  • [tpl] translation templates update for 0.12.20
  • [l10n] Commit from Jolla localisation : 471 of 471 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.19
  • [l10n] Commit from Jolla localisation : 465 of 470 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.18
  • [l10n] Commit from Jolla localization : 466 of 466 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.14
  • [tpl] translation templates update for 0.12.15
  • [tpl] translation templates update for 0.12.16
  • [l10n] Commit from Jolla localization : 460 of 465 strings translated (0 need review).
  • [tpl] translation templates update for 0.12.13
  • [l10n] Commit from Jolla localisation : 458 of 466 strings translated (3 need review).

    jolla-signon-ui-l10n

  • Updated : 1.35-10.3.1.jolla — 1.36-1.4.3
  • [l10n] Commit from Jolla localisation : 3 of 3 strings translated (0 need review).

    jolla-startupwizard

  • Updated : 0.3.36-10.3.1.jolla — 0.3.43-1.6.5
  • Unmet requirements: liblipstick-qt5.so.0
  • [startup-wizard] Move „Fetching application to install“ to horizontal center.
  • [screenblank] Power up display when starting SUW.
  • [SUW] Jolla to Device.
  • [SUW] Changed Jolla string to generic device string.
  • [startupwizard] Add a busy state while fetching application information.
  • [startupwizard] Use explicit trademark symbol.
  • [jolla-startupwizard] Show Sailfish and/or Android installation dialogs conditionally.

    jolla-startupwizard-l10n

  • Updated : 1.137-10.3.1.jolla — 1.149.1-1.8.1
  • [l10n] Branched jolla-startupwizard from version 1.149
  • [l10n] Commit from Jolla localization : 45 of 45 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.43
  • [tpl] translation templates update for 0.3.41
  • [l10n] Commit from Jolla localization : 45 of 45 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.40
  • [l10n] Commit from Jolla localisation : 44 of 45 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.38
  • [tpl] translation templates update for 0.3.39

    jolla-vault-l10n

  • Updated : 1.104-10.3.1.jolla — 1.106.1-1.5.1
  • [l10n] Branched jolla-vault from version 1.106
  • [l10n] Commit from Jolla localisation : 85 of 85 strings translated (0 need review). kernel-adaptation-pc Reverted : 3.6.11-10.2.1.jolla — 3.6.11-1.3.1
  • [packaging] Cleanup packaging.
  • [packaging] Fix build failure on unpackaged vmlinux.
  • [sailfish] Switched from git-subtree packaging to plain git branch.

    kf5bluezqt-bluez4

  • Updated : 5.24.0+git13-1.2.1 — 5.24.0+git15-1.3.3
  • [bluez-qt] Add filtering options to DeclarativeDevicesModel.
  • [packaging] Bump version
  • [bluez-qt] Add Manager::monitorObjectManagerInterfaces.

    kf5bluezqt-bluez5

  • Updated : 5.24.0+git13-1.2.1 — 5.24.0+git15-1.3.3
  • [bluez-qt] Add filtering options to DeclarativeDevicesModel.
  • [packaging] Bump version
  • [bluez-qt] Add Manager::monitorObjectManagerInterfaces.

    kpartx

  • Updated : 0.4.9-7.7.1 — 0.4.9+mer1-10.2.7.jolla
  • [lib] merge libprio in libmultipath
  • [mer] Fixed build on aarch64.
  • [mer] Migrated packaging from OBS-only to Git.
  • [multipathd] merge a more versatile CLI parser

    less

  • Updated : 436-7.33.7.1 — 436+mer1-10.2.3.jolla
  • [mer] Migrated from OBS-only packaging to Git.

    libcommhistory-qt5

  • Updated : 1.9.34-1.2.1 — 1.9.35-1.3.3
  • [qt] Drop Qt gui usage.

    libcontacts-qt5-l10n

  • Updated : 1.14-1.3.1 — 1.15-1.4.3
  • [l10n] Commit from Jolla localisation : 3 of 3 strings translated (0 need review).

    libdsme

  • Updated : 0.64.2-1.1.1 — 0.66.0-1.4.1
  • [messages] Add DSM_MSGTYPE_SET_BATTERY_LEVEL.
  • [messages] Make dsme message type identifiers unique.
  • [protocol] Fix message io vector size calculation
  • [protocol] Set errno when abandoning dsmesock_send_with_extra()

    libglibutil

  • Updated : 1.0.26-1.2.1 — 1.0.29-1.4.1
  • [glibutil] Added gutil_hexdump function
  • [glibutil] Fixed dependencies for pkgconfig target
  • [glibutil] MER#1437
  • [test] Fixed Windows unit tests
  • [test] Unit test for gutil_hexdump
  • [glibutil] Added gutil_idle_pool_get function
  • [glibutil] MER#1437
  • [glibutil] GUtilIdlePool is not a GObject anymore
  • [glibutil] MER#1437
  • [glibutil] Took out glib-object.h from public headers

    libgofono

  • Updated : 2.0.5-1.1.1 — 2.0.6-1.3.1
  • [libgofono] Adapt to changes in libglibutil
  • [libgofono] MER#1518

    libgrilio

  • Updated : 1.0.20-1.2.1 — 1.0.22-1.4.1
  • [libgrilio] Explicitely include glib-object.h where it’s needed
  • [libgrilio] MER#1438
  • [libgrilio] Added grilio_channel_inject_unsol_event.
  • [libgrilio] Unit test for grilio_channel_inject_unsol_event

    libgsupplicant

  • Updated : 1.0.7-1.3.1 — 1.0.8-1.3.1
  • [gsupplicant] Explicitely include glib-object.h where it’s needed
  • [gsupplicant] MER#1437

    libhybris

  • Updated : 0.0.5.20-10.3.2.jolla — 0.0.5.23-1.3.1
  • Unmet requirements: libOpenCL.so.1
  • [rpm] Add missing ldconfig for libOpenCL to spec. MER#1891
  • [libhybris] Add OpenCL support.
  • [update] Update libhybris submodule and packaging. MER#1891
  • [libhybris] Convert to submodule. MER#1890

    libiphb

  • Updated : 1.2.4-1.1.1 — 1.2.5-1.3.1
  • [dsme] Make dsme message type identifiers unique.

    libjollasignonuiservice-qt5

  • Updated : 0.3.3-10.2.1.jolla — 0.4.0-1.3.5
  • [libjollasignonui] Deprecate explicit in-process service name + path.

    libjollasignonuiservice-qt5-l10n

  • Updated : 1.24-10.3.1.jolla — 1.25-1.4.3
  • [l10n] Commit from Jolla localisation : 6 of 6 strings translated (0 need review).

    libkeepalive

  • Updated : 1.5.0-1.2.1 — 1.6.2-1.5.3
  • Binaries added : libkeepalive-glib-doc – 1.6.2-1.5.3, libkeepalive-doc – 1.6.2-1.5.3
  • [keepalive] Run astyle on lib & plugin.
  • [build] Add build dependency to mer-qdoc-template.
  • [backgroundjob] Drop invalid „id“ QML property
  • [doc] Build Doxygen documentation for glib API.
  • [doc] Build qdoc documentation for QML API.
  • [doc] Unify spelling and use of acronyms.
  • [doc] Update copyright blurbs.
  • [nemo-keepalive] Warn on importing nemo.keepalive 1.0.
  • [nemo-keepalive] Warn on importing nemomobile.keepalive.
  • [displayblanking] Drop unneeded safety margin from renew period.
  • [displayblanking] Listen to blank prevent allowed signals.

    libmediaart

  • Updated : 1.9.0-1.2.1 — 1.9.4-1.3.2
  • [libmediaart] Update to 1.9.4, remove git subtree and build with Meson.

    libngf-qt5

  • Updated : 0.6.0-1.2.1 — 0.6.1-1.3.3
  • [qt] Drop Qt gui and quick usage.

    libnice

  • Updated : 0.1.10-1.1.4 — 0.1.13-1.3.2
  • [libnice] Upgrade to 0.1.13.

    libqapk

  • Updated : 0.4.7-10.2.1.jolla — 0.4.11-1.4.2
  • [apk] Use resource indices instead of names, as the latter are often obfuscated.
  • [qapk] Properly link package and .pc version.
  • [qapk] Declare methods that are logically const as const.
  • [qapk] Follow coding conventions better.

    libsailfishapp

  • Updated : 1.2.5-10.3.2.jolla — 1.2.8-1.4.5
  • [libsailfishapp] Remove python-markdown build-requirement from libsailfishapp.
  • [libsailfishapp] Migrate Python Markdown documentation to qdoc.
  • [libsailfishapp] Add information about additional translation sources to the README. Fixes MER#1866
  • [libsailfishapp] Optimize string operations. Fixes MER#1867
  • [libsailfishapp] Try to load also appname.qm for translations.

    libsysperf

  • Updated : 0.2.4-10.2.1.jolla — 0.2.4.2-10.2.5.jolla No new changelog entries!

    libzypp-bindings

  • Updated : 0.5.9.1-1.3.1.1 — 0.5.9.1-10.2.13.jolla – Drop old changelog entries with QA issues.

    lipstick-jolla-home-demos

  • Updated : 0.5.2-10.2.2.jolla — 0.5.3-1.3.30
  • [events] Do not use explicit year.

    lipstick-jolla-home-qt5

  • Updated : 0.36.30-10.3.1.jolla — 0.36.52-1.10.10
  • Unmet requirements: sailfish-settings-networking >= 0.4.15, sailfish-installationhandler, liblipstick-qt5.so.0
  • [security] Swap the password dialog message and instruction labels.
  • [lipstick-jolla-home] Do not focus device lock view during startup wizard.
  • [lipstick-jolla-home] Remove hardcoded /home/nemo paths.
  • [homescreen] Avoid removing focus from windows during transistions.
  • [homescreen] Fix lockscreen camera failing to launch.
  • [homescreen] Suppress feedback on device lock authentication starting.
  • [pinentry] Ensure the SIM PIN input has focus when it’s on screen.
  • [security] Add a daemon for entering passwords.
  • [security] Add device lock and polkit authentication dialogs.
  • [lipstick-jolla] Use separate package handler instead of jolla-store.
  • [wlan] Allow manually setting up network in connection dialog.
  • [lipstick-jolla] Don’t make connection selector busyindicator smaller in tablet.
  • [lipstick-jolla] Provide some hyphenated translations for usb mode.
  • [weather] Change Jolla to Sailfish.
  • [lipstick-jolla-home] Do not allow unlocking when display is off.
  • [bluetooth] Always complete requests so that we don’t get stuck.
  • [bluetooth] Let’s make sure we are initiating only when we are initiating.
  • [lipstick] Show SIM selector even if shortcuts and quick actions have been disabled.
  • [jolla-home] Remove extra padding from avatar test code.
  • [lipstick-jolla-home] Prolong lockscreen blank timeout when using MPRIS controls.
  • [lipstick] Unify margins between status area indicators
  • [lipstick] Don’t reserve space for Bluetooth indicator if it is invisible
  • [lipstick-jolla-home] Make LauncherItem visible for non grid apps.
  • [notifications] Use common dismiss animation.
  • [lipstick-jolla-home] Allow increasing the boundary detection area and press delay for peek filter.
  • [lipstick-jolla] Fix progressbar reference.
  • [lipstick-jolla] Progress support on notifications.
  • [bluetooth] Avoid creating extra BluezQt::Manager instance.
  • [bluetooth] Avoid using exit timer with arbitrary timeout.
  • [bluetooth] Disable BluezQt::Manager object updates when not needed.
  • [lipstick-jolla-home] Suppress CoverActionModel logs.
  • [bluetooth] prevent wait spinner blocking in case pairing fails.

    lipstick-jolla-home-qt5-l10n

  • Updated : 1.218-10.3.1.jolla — 1.232.1-1.9.1
  • [l10n] Branched lipstick-jolla-home-qt5 from version 1.232
  • [l10n] Commit from Jolla localization : 183 of 183 strings translated (0 need review).
  • [tpl] translation templates update for 0.36.49
  • [tpl] translation templates update for 0.36.51
  • [l10n] Commit from Jolla localization : 165 of 173 strings translated (2 need review).
  • [tpl] translation templates update for 0.36.47
  • [l10n] Commit from Jolla localisation : 169 of 173 strings translated (0 need review).
  • [tpl] translation templates update for 0.36.44
  • [tpl] translation templates update for 0.36.45
  • [tpl] translation templates update for 0.36.46
  • [l10n] Commit from Jolla localization : 167 of 167 strings translated (0 need review).
  • [tpl] translation templates update for 0.36.33
  • [tpl] translation templates update for 0.36.39
  • [tpl] translation templates update for 0.36.41
  • [tpl] translation templates update for 0.36.43

    lipstick-qt5

  • Updated : 0.32.13-1.4.2 — 0.32.21-1.5.4
  • Unmet requirements: liblipstick-qt5.so.0
  • [lipstick] Do not freeze on exit.
  • [lipstick] Handle unix signals more properly.
  • [lipstick] Properly link rpm package and .pc file versions.
  • [lipstick] Handle display wakeup to dimmed state. MER#1831
  • [lipstick] Android notifications to wake display only if having feedback.
  • [lipstick] Add support for vibration notification hint.
  • [lipstick] Expose mime-type from LauncherItem.
  • [lipstick] Remove legacy orientation lock file support.
  • [lipstick] Add progress hint for notifications.
  • [lipstick] Remove copies of qmsystem classes that are not used.

    lipstick-qt5-l10n

  • Updated : 1.65-10.3.1.jolla — 1.66-1.4.3
  • [l10n] Commit from Jolla localisation : 26 of 26 strings translated (0 need review).
  • [tpl] translation templates update for 0.32.14

    lzop

  • Updated : 1.03-10.2.3.jolla — 1.04-1.3.4
  • Binaries added : lzop-doc – 1.04-1.3.4
  • [aarch64] Update to 1.04.

    mapplauncherd

  • Updated : 4.1.25-1.1.1 — 4.1.28-1.5.2
  • [mapplauncherd] Create cgroup for each process if possible. Fixes MER#1896
  • [mapplauncherd] Fix race when in writing the daemon PID file and exiting.
  • [mapplauncherd] Support running boosters as forking systemd services.

    mapplauncherd-booster-browser

  • Updated : 0.0.3-10.2.1.jolla — 0.0.4-1.3.6
  • [booster-browser] Remove silicabackground dependency.

    mapplauncherd-booster-silica-qt5

  • Updated : 0.2.4-10.2.1.jolla — 0.2.6-1.4.6
  • [booster-silica] Add a login session root parent booster .
  • [booster-silica] Remove Silicabackground dependency.

    mce

  • Updated : 1.90.4-1.2.1 — 1.93.4-1.7.1
  • [dsme] Do not take shutdown actions on shutdown notification.
  • [display] Normalize whitespace
  • [dsme] Make dsme message type identifiers unique.
  • [display] Unblank when compositor starts during bootup.
  • [tklock] Disable display state restore during bootup.
  • [datapipe] Add init_done_pipe.
  • [datapipe] Remove lintisms.
  • [datapipe] Use macro for making display state requests.
  • [datapipe] Use macro for making tklock requests.
  • [dbus] Add dbus peer tracking api.
  • [dbus] Cleanup mce-dbus header file.
  • [display] Add blanking pause allowed -policy.
  • [display] Add slack to blanking pause timeout.
  • [display] Allow blanking pause when app is on top of lockscreen.
  • [display] Expose blanking pause allowed -policy on dbus.
  • [display] Only topmost application can pause blanking.
  • [display] Track pid of topmost window.
  • [dsme] End transition submode on init_done condition.
  • [inactivity] Optional shutdown after idling. Fixes MER#1889
  • [mce] Make tristate_t type generally available.
  • [build] Remove unneeded include statements
  • [fingerprint] Ignore powerkey during fingerprint enroll.
  • [logging] Log human readable state names instead of enumeration values
  • [battery-bme] Use charger_state_t instead of gboolean
  • [datapipe] Unify naming.
  • [tklock] Add settings for proximity sensor uncover delays. Fixes MER#1881

    mce-headers

  • Updated : 1.24.0-1.2.1 — 1.25.0-1.4.1
  • [mce] Add blanking pause related D-Bus constants
  • [mce] Add blanking pause related D-Bus constants.

    mer-core-project-config

  • Updated : 0.2.0-1.4.1 — 0.2.3-1.7.1
  • [prjconf] Add _obs_build_project macro.
  • [prjconf] Remove unused patform-version macros.
  • [prjconf] Remove build and build-compare from Support as they are not used.

    mer-kickstarter

  • Updated : 0.19-2.13.1 — 0.20.1-10.2.4.jolla
  • [mer] Converted to tar_git packaging format. – Added support for PreScripts: – Make Language, Keyboard and Timezone optional as well. – Don’t require RootPass to be set. – New variable ImageType which if set currently can take special version of Url field in repos. – Fix packaging – Upstream at 0.18 – Fix problem where dicts are not merged properly (Fixes MER#583) – Upstream at 0.17: – Fixes MER#549: Don’t override data from local section with data inherited se – Handle –repo-url-variables command line – Use the RepositoryURLVariables key as a plain map and inform users when it is invalid – Clarify the use of Part: key if the value isn’t found as a file – If FileName is missing for a Configuration, use Name – Update to 0.16 – Update to version 0.14 – Fork into mer-kickstarter – make Active keyword works – enhance bootloader option support – Support bootloader options (bmc #16408) – Fixed bmc #16397 – temporary .yaml~ files are read – Now require python-yaml – Support external configurations – Support additional keywords to keep up with static ks files – 0.8 – Fix schedule handling. – Use cron style syntax for schedule – Fixed path where files are stored on repo – Add python-lxml as a runtime dependency – Create index file with all kickstart files – Make it build on other distros – Initial Release

    mic

  • Updated : 0.14-9.6.1 — 0.14+git3-10.2.5.jolla
  • Binaries added : mic-livecd – 0.14+git3-10.2.5.jolla, mic-yum – 0.14+git3-10.2.5.jolla, mic-liveusb – 0.14+git3-10.2.5.jolla
  • [mic] Do not require /etc/meego-release on sailfish.
  • [mic] Use python-distro.
  • [imager] Warn if no file matches an %attachment.
  • [btrfs] use subvolume name instead of id in fstab
  • [mic] Fix build when /etc/resolv.conf is symbolic link.
  • [packaging] Split out infrequently used plugins.
  • [zypp] don’t crash sorting an empty list – Upgrade to version 0.3, changes including: – Unit test support, run ‚make test‘ – Enable proxy support in config file – Refine configmgr and pluginmgr – Support multi instance with different cache dir – Add 47 system test case – Improve md5sum generation – Add repo option –ssl_verify – Add option –name_prefix – Reformatted code according to PEP08 – Backport from mic2: – Add priority and cost option for repos – Reinstroduced compress-disk-image option

    mms-engine

  • Updated : 1.0.58-1.2.1 — 1.0.59-1.3.2
  • [mms-lib] Fixed build against libglibutil >= 1.0.27. MER#1437
  • [test] Fixed compilation warning

    mtools

  • Updated : 4.0.12-4.4.1 — 4.0.12+mer1-10.2.3.jolla
  • [mer] Migrated from OBS-only packaging to Git. – Fix build on aarch64. – Update to 4.0.4 – add check for the info file before installing it in post/preun – add %doc to man/info in spec file

    nemo-qml-plugin-alarms-qt5

  • Updated : 0.3.1-10.2.1.jolla — 0.3.2-1.3.3
  • [alarms] Make sure metatype has been registered for Qt DBus.

    nemo-qml-plugin-calendar-qt5

  • Updated : 0.2.22-1.2.1 — 0.3.1-1.4.3
  • [calendar-plugin] Fix saving event with no reminder.
  • [nemo-qml-plugin-calendar] Changes for accept invitation from email.

    nemo-qml-plugin-connectivity

  • Updated : 0.1.1-1.3.1 — 0.1.3-1.4.3
  • [nemo-connectivity] No signal from connection selector dialog exposed when it closed.
  • [nemo-connectivity] Expose ConnectHelper to C++ side as well.

    nemo-qml-plugin-dbus-qt5

  • Updated : 2.1.12-1.2.1 — 2.1.17-1.4.3
  • [nemo-dbus] Fix build order.
  • [nemo-dbus] Expose DBus argument demarshalling (old unwind) to C++.
  • [nemo-dbus] Expose DBus argument unwind (demarshalling) to C++.
  • [dbus] Fix crash when one of many subscribing objects is destroyed.
  • [nemo-qml-plugin-dbus] Include space between error message and string.
  • [nemo-qml-plugin-dbus] Unregister service in destructor.

    nemo-qml-plugin-devicelock

  • Updated : 0.2.11-1.2.1 — 0.2.14-1.4.5
  • [devicelock] Require virtual devicelock daemon.
  • [devicelock] Fix authentiation failure due to a PID mismatch.
  • [devicelock] Add API for services to directly request permission for actions.
  • [devicelock] Allow backends to provide a reason for a lockout.

    nemo-qml-plugin-email-qt5

  • Updated : 0.2.3-10.2.1.jolla — 0.3.2-1.4.1
  • [nemo-qml-plugin-email] Improve email logging.
  • [nemo-qml-plugin-email] Fix bug in EmailAgent::createFolder.
  • [nemo-qml-plugin-email] Changes for calendar responses from email (Exchange Activesync accounts).
  • [nemo-email] Calendar invitation part is opening in Notes application after other attachment downloaded. Contibutes to
  • [nemo-qml-plugin-email] Renamed downloadStatus function of the attachmentListModel.
  • [sailfish-eas] Calendar invitation part is opening in Notes application after other attachment downloaded. Contibutes to
  • [nemo-qml-plugin-email] Unable to forward message with multiple non-downloaded attachments.
  • [nemo-qml-plugin-email] Provide more accurate progress.
  • [nemo-qml-plugin-email] Support canceling attachment download.
  • [nemo-qml-plugin-email] Do not write attachment to disk upon model reset.
  • [nemo-qml-plugin-email] Monitor saved attachments.
  • [nemo-qml-plugin-email] Simplify code a bit + fix style issues.
  • [email] Suppress debug level messages coming from email agent.

    nemo-qml-plugin-email-qt5-offline

  • Updated : 0.2.3-10.2.1.jolla — 0.2.7-1.3.46
  • [nemo-qml-plugin-email] Provide more accurate progress.
  • [nemo-qml-plugin-email] Support canceling attachment download.
  • [nemo-qml-plugin-email] Do not write attachment to disk upon model reset.
  • [nemo-qml-plugin-email] Monitor saved attachments.
  • [nemo-qml-plugin-email] Simplify code a bit + fix style issues.
  • [email] Suppress debug level messages coming from email agent.

    nemo-qml-plugin-filemanager

  • Updated : 0.1.4-1.2.1 — 0.1.6-1.3.5
  • Unmet requirements: libKF5Archive.so.5
  • [nemo-filemanager] Add extected and extrected target path roles.
  • [filemanager] Introduce ArchiveInfo and ArchiveModel.

    nemo-qml-plugin-notifications-qt5

  • Updated : 1.1.4-1.3.1 — 1.1.5-1.4.3
  • [nemo-qml-plugin-notifications] Deprecate origin property.

    nemo-qml-plugin-systemsettings

  • Updated : 0.3.0-1.3.1 — 0.4.9-1.13.2
  • [nemo-qml-plugin-systemsettings] Don’t queue multiple refreshes.
  • [developermode] Change developermode enabling on top PackageKit-Qt.
  • [developermode] Refresh package cache before resolving developer mode packages.
  • [settings-vpn] Remove hardcoded user and move under privileged system data.
  • [settings-vpn] Re-sort VPNs only when the name property is changed.
  • [settings-vpn] When VPN doesn’t provide domain create one.
  • [systemsettings-vpn] Disconnect VPN when removed from the model.
  • [nemo-settings-system] Cleanup VPN automaticUpDown.
  • [nemo-settings-system] Connect pending disconnect only when disconnecting.
  • [disk] Do not follow to other filesystems.
  • [disk] Use QStorageInfo.
  • [packaging] Update connman build requirement.
  • [nemo-systemsettings] Add autoConnect property for VpnConnection.
  • [nemo-systemsettings] Allow only one active vpn at once.
  • [nemo-systemsettings] Remove vpn-updown script and service.
  • [systemsettings] Add vpn logging category.
  • [about] More locations for serial number.
  • [nemo-systemsettings] Change PartitionManager to use Udisks2.
  • [developermode] Remove AccountManager references.
  • [developermode] Remove developerModeAccountProvider property.
  • [nemo-systemsettings] Expose deviceName from the PartitiionModel.
  • [nemo-systemsettings] Show also /dev/sd[a-z] devices in paritition model.
  • [nemo-systemsettings] With Udisks2 external device mounting changes under /run.
  • [developermode] Remove undefined function.
  • [qml-plugin-systemsettings] disable accounts some more.
  • [qml-plugin-systemsettings] Disable developer mode account check for now.
  • [developermode] Add a developerModeAvailable property.
  • [developermode] Add DeveloperModeSettings::developerModeAccountProvider.
  • [developermode] Always resolve the developer-mode package before doing an install/remove.
  • [developermode] Selectively update the install/remove progress value.
  • [developermode] Use PackageKit directly to install developer mode packages.
  • [vpn] Store VPN types in generic strings instead of hard-coded enums.
  • [nemo-qml-plugin-systemsettings] Provide OS name from os-release.

    nemo-qml-plugin-thumbnailer-qt5

  • Updated : 0.3.5-1.2.1 — 0.3.6-1.3.3
  • [thumbnailer] Suppress debug level messages.

    nemo-qml-plugin-time-qt5

  • Updated : 0.1.0-1.2.1 — 0.1.1-1.3.3
  • [qt] Drop Qt gui usage.

    nemo-transferengine-qt5

  • Updated : 0.2.1-1.2.1 — 0.3.1-1.4.5
  • [transfer-engine] Fix canceled download keeping progress notification.
  • [transfer-engine] Add progress info to notifications.
  • [sharing] Show account icon on sharing list.

    nemo-transferengine-qt5-l10n

  • Updated : 1.28-10.3.1.jolla — 1.33.1-1.6.1
  • [l10n] Branched nemo-transferengine-qt5 from version 1.33
  • [l10n] Commit from Jolla localisation : 9 of 9 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.1
  • [l10n] Commit from Jolla localization : 9 of 9 strings translated (0 need review).
  • [tpl] translation templates update for 0.3.0

    ngfd

  • Updated : 0.112-1.1.2 — 1.0.1-1.4.3
  • [callstate] Don’t publish active to ringing state change.
  • [build] Build new event features.
  • [build] Build new null sink.
  • [build] Build new route plugin.
  • [build] Include new dbus helper to build.
  • [build] Update version to 1.0.
  • [callstate] Fix memleak when call state changes.
  • [callstate] Use new core-dbus helper.
  • [canberra] Update request proplist after uploading.
  • [canberra] Use sink interface for userdata.
  • [data] Update default ffmemless effects.
  • [data] Update default plugin configs.
  • [data] Update default values to resource plugin.
  • [dbus] Check for valid client for pause and stop methods.
  • [dbus] Have limit on max requests.
  • [dbus] Have maximum client limit. Fixes MER#1825
  • [dbus] Have per-client request limits. MER#1825
  • [dbus] Remove delaying, as it can be handled in gst plugin.
  • [dbus] Use dynamic userdata in favor of old static.
  • [dbus] Use request’s id instead of property value.
  • [%define common_entry_stuff]
  • [%define message.haptic]
  • [%define message.sound]
  • [devicelock] Use new core-dbus helper.
  • [ffmemless] Don’t spam error messages.
  • [ffmemless] Initialize allocated data to zero.
  • [ffmemless] Use new haptic API.
  • [gst] Add fade and delay configurations.
  • [gst] Call synchronize after startup delay.
  • [gst] Clear bus watch source on error.
  • [gst] Remove unnecessary casts.
  • [gst] Stop all audio if voice call is activated.
  • [mce] Remove display control functionality.
  • [mce] Use new core-dbus helper.
  • [message]
  • [message => context@ouput.class == external, context@volume > (int) 0]
  • [message => context@volume == (int) 0]
  • [message @priority 100 => context@disable_message_tone == (bool) true]
  • [ngfd] Add DBus helper.
  • [ngfd] Add define parsing to events.
  • [ngfd] Add function for copying requests.
  • [ngfd] Add function to get current log level.
  • [ngfd] Add setter and getter for plugin userdata.
  • [ngfd] Add userdata set and get to sink interface.
  • [ngfd] Allow defining keytypes in plugin configuration.
  • [ngfd] Assign proper id to requests.
  • [ngf] Define value identifier strings in n_value header.
  • [ngfd] Fix segfault if daemon is started without sinks.
  • [ngfd] Handle SIGINT and SIGTERM.
  • [ngfd] Implemented improved events.
  • [ngfd] Load plugins in two steps.
  • [ngfd] Log both plugin and file names when loading.
  • [ngfd] Make sure fallback request has correct id.
  • [ngfd] Read event definitions in descending order.
  • [ngfd] Revise haptic handling.
  • [ngfd] Update context internal handling.
  • [ngfd] Version 1.0.
  • [ngf] Enable storing userdata for interface.
  • [ngf] Fix unnecessary memory allocation in proplist dump.
  • [ngf] Remove context key entry if no subscribers.
  • [null] Simple sink to handle any event.
  • [packaging] Build and package new route plugin.
  • [packaging] Bump version.
  • [packaging] Package new null sink.
  • [plugins] Add type for plugins that implement sink interface.
  • [real_entry]
  • [resouce] Update resource filtering to type based.
  • [route] New plugin for following audio route.
  • [service] Allow passing arguments from sysconfig file.
  • [sinkinterface] Add sink type for type based filtering.
  • [streamrestore] Add function to get volume to volumecontroller.
  • [streamrestore] Allow handling both builtin and external events.
  • [streamrestore] Allow transforming stream volumes to context values.
  • [streamrestore] Build with ohm-ext-route flags.
  • [streamrestore] Follow audio route.
  • [streamrestore] Get initial volume for streams we follow.
  • [streamrestore] Listen to individual context keys instead of all of them.
  • [streamrestore] Remove unnecessary casts.
  • [streamrestore] Update media state to ngfd context.
  • [tests] Add type to test-fake-plugin.
  • [tests] Update context tests.
  • [tests] Update core event related tests.
  • [tests] Update test building to compile with new dbus helper.

    ngfd-plugin-droid-vibrator

  • Updated : 0.91.4-10.2.1.jolla — 1.0-1.3.12
  • [packaging] Update ngfd requirements.
  • [vibrator] Add sink interface type.
  • [vibrator] Update default effect configuration.
  • [vibrator] Use haptic API from NGFD 1.0.
  • [build] Add configure option to build native implementation.
  • [droid-vibrator] Split plugin and hal implementation.
  • [native-vibrator] Add native implementation.
  • [packaging] Add packaging for native vibrator.
  • [packaging] Bump droid vibrator version.
  • [packaging] Droid and native implementations conflict.
  • [packaging] Fix license for droid vibrator.
  • [README] Update description to mention native implementation.

    non-oss-package-groups

  • Updated : 1.0.2-10.3.1.jolla — 1.0.7-1.6.2
  • [core] Add gawk for now.
  • [core] Drop prelink from core.
  • [patterns] Remove ‚build‘ from packaging-tools.
  • [patterns] Add sailfish-archive to default application list.
  • [patterns] Require tiff and webp Qt image format plugins.
  • [patterns] Drop obsoleted patterns from repos.
  • [patterns] Move ssu vendor data out of core.

    non-oss-project-config

  • Updated : 0.6.17-10.2.1.jolla — 0.7.1-1.5.4
  • [non-oss] Remove _obs_build_project macro.
  • [prefer] Prefer sailfish-version-variant.

    ofono

  • Updated : 1.20+git6-1.4.1 — 1.21+git17.3-1.10.1
  • [ril] Handle NITZ string without DST part.
  • [ril] Don’t wait for SIM state change after enabling/disabling pin.
  • [ussd] Don’t ignore data from TERMINATED response.
  • [ril] Fix SET_INITIAL_ATTACH_APN crash on some MTK devices.
  • [ril] Don’t use QUERY_AVAILABLE_BAND_MODE with MTK RILs.
  • [ofono] Return AccessDenied if filter disallows a data call.
  • [ril] Deduce signal strength from RSRP.
  • [ril] Fixed parsing of data call list.
  • [ofono] Added support for gprs filter plugins.
  • [ofono] Fixed a few corner cases in D-Bus queue
  • [unit] Added test-dbus-queue.
  • [unit] Added test-gprs-filter
  • [ril] Added ril_config_merge_files utility
  • [ril] Allow comments in int array config values
  • [ril] Allow multiple RIL config files.
  • [ril] Unit test for ril_config.c
  • [ril] Explicitely include <glib-object.h> where it’s needed. MER#1437</glib-object.h>
  • [ril] Detect MTK variant based on events codes.
  • [ril] Fix UICC subscription.
  • [gprs] Disable special treatment of LTE
  • [ril] A better way to reset the SIM state
  • [ril] Give SIM card 10 seconds to activate USIM app.
  • [ril] Handle RIL_UNSOL_SIM_REFRESH
  • [ril] Make sure that SET_UICC_SUBSCRIPTION is not repeated forever.
  • [ril] Make CBS support configurable. Fixes MER#1873
  • [mtk] Handle INCOMING_CALL_INDICATION event.
  • [ril] Make 4G work on MTK tablet.
  • [ril] Poll registration state on PS_NETWORK_STATE_CHANGED.
  • [ofono] sailfish_watch should reset online flag when modem is removed
  • [ril] INT_MAX -> SAILFISH_CELL_INVALID_VALUE where appropriate
  • [ril] Use the right cid to signal context settings change.
  • [rpm] Made dbus unit tests work with older versions of dbus (e.g. 1.6)
  • [unit] Added test-sailfish_watch
  • [ofono] Upgrade baseline to 1.21.
  • [ril] Updated netmon implementation
  • [ril] A few corner cases for cached SIM info
  • [ril] Don’t require AID for SIM pin requests.
  • [unit] Added test-sailfish_sim_info_dbus
  • [unit] Improved ril_util.c test coverage
  • [unit] Improved test coverage for sailfish_sim_info.c
  • [ofono] gprs: Add __ofono_gprs_context_settings_by_type
  • [ril] Support for vendor extensions.
  • [ril] Don’t repeat cell info requests indefinitely.
  • [ril] Validate dbus_bool_t
  • [unit] Added test-sailfish_cell_info_dbus

    ohm-plugins-misc

  • Updated : 1.4.1-1.1.2 — 1.4.4-1.4.3
  • [mdm] Update plugin D-Bus rules.
  • [mdm] Update plugin policy enforcement configuration.
  • [route] Update plugin D-Bus rules.
  • [accessories] Recognize alternative HSP HS UUID.
  • [media] Handle alarm media type.

    oneshot

  • Updated : 0.4.6-1.1.1 — 0.4.8-1.3.1
  • [packaging] Require findutils.
  • [packaging] Do not require qt for building.

    openvpn

  • Updated : 2.3.13-1.2.1 — 2.4.5-1.3.1
  • [openvpn] Update to 2.4.5.

    osc

  • Updated : 0.146.0-1.3.1 — 0.146.0-10.2.5.jolla – Drop old changelog entries with QA issues. – Trap any kind of exception during plugin parsing (eg IOError for a dangling symlink) – Add architecture and scheduler maps – Upgrade osc to 0.128 with updated MeeGo patches – Add patch to remember authentication header to save time and server loading – Disable ‚authentication header‘ patch temporarily – Upgrade to 0.124 to work with new obs APIs – Update to 0.117 – Synced the changes in osc-mobsr.py according new version – Added new plugin to support ‚unmobsr‘ cmd – Fixed of mobsr, should check remote for .changes – Synced mobsr with git code, para of server_diff to False – Add two new plugin to support ‚mobaccept‘ and ‚mobdecline‘ cmd – They can accept/decline req and send mail to maillist and submitter automatically – Added an alias ‚mobrevoke‘ to ‚unmobsr‘ cmd – Some code cleaning – Debian package error fix – Remove moblin plugsin from pkg, and use spectacle yaml – Update to 0.115 – Add one plugin to support ‚mobci‘ cmd, a wrapper of ‚ci‘ to do extra check for moblin packages before commit. – Fixed mobsr – Update to support target – Adapt: Moblin:2.0 -> Trunk – make default build_platform point to Trunk package-groups Reverted : 0.9.18-10.3.1.jolla — 0.1-1.2.1 Binaries removed : package-groups-doc, patterns-sailfish-demo-android-apps
  • Unmet requirements: ui-democontent-settings – Initial version of Mer package groups

    parted

  • Updated : 3.0-10.2.1.jolla — 3.0+mer1-10.2.5.jolla
  • [mer] Migrated from OBS-only packaging to Git. – Merged 9 new upstream patches and dropped 2 old ones

    passwd

  • Updated : 0.78-1.1.2 — 0.79-1.3.1
  • [packaging] Update to version 0.79.

    patterns-sailfish

  • Updated : 1.0.2-10.2.1.jolla — 1.0.7-1.6.4
  • Unmet requirements: sailfish-archive
  • [core] Add gawk for now.
  • [core] Drop prelink from core.
  • [patterns] Remove ‚build‘ from packaging-tools.
  • [patterns] Add sailfish-archive to default application list.
  • [patterns] Require tiff and webp Qt image format plugins.
  • [patterns] Drop obsoleted patterns from repos.
  • [patterns] Move ssu vendor data out of core.

    perl-Devel-Symdump

  • Updated : 2.08-5.5.1 — 2.10+mer1-10.2.9.jolla
  • [mer] Migrated from OBS-only packaging to Git.
  • [mer] Upgraded to upstream version 2.10. – Update to 2.08 – Add %doc before man file entry

    perl-Error

  • Updated : 0.17020-1.3.1 — 0.17020+mer2-10.2.2.jolla
  • [mer] Dropped old static change log items.
  • [mer] Converted to tar_git packaging format. – Update to Error-0.17020.tar.gz

    perl-Pod-Coverage

  • Updated : 0.20-1.1.1 — 0.20+mer1-10.2.6.jolla
  • [mer] Migrated from OBS-only packaging to Git. – Update to 0.20. – Update to 0.19. – Use fixperms macro instead of our own chmod incantation. – Reformat to match cpanspec output.

    perl-Test-Pod-Coverage

  • Updated : 1.08-6.6.1 — 1.08+mer1-10.2.4.jolla
  • [mer] Converted to tar_git packaging format.

    policy-settings-common

  • Updated : 0.7.3-1.3.1 — 0.7.4-1.4.2
  • [common] Do not route from usbmic if fmradio is enabled.
  • [common] Make earpiece detachable audio accessory.
  • [common] Make usbaudio higher in priority.
  • [common] Never route to usbaudio if voice call is active.
  • [common] Use more broad match for media speaker override.

    poppler

  • Updated : 0.47-1.2.1 — 0.62.0-1.3.3
  • Unmet requirements: libpoppler.so.73
  • [poppler] Update to 0.62.0.

    project-config

  • Updated : 0.0.6-1.1.1 — 0.0.6-1.2.4
  • [tools] Remove _obs_build_project macro.
  • [tools] Remove prefer lines.
  • [l10n] fix _with_l10n rpm macro
  • [l10n
  • [prjconf] Define _with_l10n
  • [prjconf] Define with_l10n
  • [prjconf] Add project name,

    pulseaudio

  • Updated : 8.0+git13-1.2.1 — 11.1+git2-1.4.1
  • Unmet requirements: libpulsecommon-11.1.so, libpulsecore-11.1.so
  • [sailfish] bluez4-device: Set suspend correctly when connecting device.
  • [sailfish] Update to PulseAudio 11.1.

    pulseaudio-modules-droid

  • Updated : 8.0.64.1-10.3.1.jolla — 11.1.67-1.3.2
  • Unmet requirements: libpulsecommon-11.1.so, libpulsecore-11.1.so
  • [common] Add quirk output_make_writable.
  • [README] Add description for output_make_writable quirk.
  • [sink] Implement output_make_writable quirk.
  • [card] Update to PulseAudio 11.1.
  • [common] Decrease verbosity of failing input resume.
  • [source] Post silence if resuming input stream fails.
  • [card] Update record profile correctly with merged input.
  • [common] Get mapping based on device.
  • [packaging] Bump version.
  • [sink] Use pa_memblock_acquire_chunk.

    pulseaudio-modules-droid-glue

  • Updated : 8.0.2-10.3.1.jolla — 11.1.2-1.4.3
  • Unmet requirements: libpulsecommon-11.1.so, libpulsecore-11.1.so
  • [pulseaudio-modules-droid-glue] Build against PulseAudio 11.1.

    pulseaudio-modules-droid-sbj

  • Updated : 8.0.64.1-10.3.1.jolla — 11.1.66-1.4.2
  • Unmet requirements: libpulsecommon-11.1.so, libpulsecore-11.1.so
  • [card] Update to PulseAudio 11.1.
  • [common] Decrease verbosity of failing input resume.
  • [source] Post silence if resuming input stream fails.
  • [card] Update record profile correctly with merged input.
  • [common] Get mapping based on device.
  • [packaging] Bump version.
  • [sink] Use pa_memblock_acquire_chunk.

    pulseaudio-modules-nemo

  • Updated : 8.0.24.1-1.2.1 — 11.1.24-1.4.2
  • Unmet requirements: libpulsecommon-11.1.so, libpulsecore-11.1.so
  • [packaging] Bump version.
  • [pulseaudio-modules-nemo] Build against PulseAudio 11.1.

    pulseaudio-policy-enforcement

  • Updated : 8.0.34.1-1.2.1 — 11.1.36-1.5.2
  • Unmet requirements: libpulsecommon-11.1.so, libpulsecore-11.1.so
  • [policy-group] Check moving source output properly.
  • [classify] Add functions to fetch all card,sink,source types.
  • [classify] Reserve large enough result object.
  • [policy] Reset all types before sending current state.
  • [pulseaudio-policy-enforcement] Build against PulseAudio 11.1.

    pygpgme

  • Updated : 0.1-8.8.1 — 0.1+mer1-10.2.9.jolla
  • [mer] Migrated from OBS-only packaging to Git.

    python-cheetah

  • Updated : 2.4.4-5.5.1 — 2.4.4+mer1-10.2.5.jolla
  • [mer] Migrated from OBS-only packaging to Git. – Update to 2.4.0 – Initial Import to Moblin

    python-iniparse

  • Updated : 0.3.1-1.1.1 — 0.3.1+mer1-10.2.4.jolla
  • [mer] Migrated from OBS-only packaging to Git. – Update to 0.3.1 and enable spectacle – Update to 0.3.0 – make it build on opensuse – Added missing tar – Update to version 0.2.4

    python-pycurl

  • Updated : 7.19.0-4.4.1 — 7.19.0+mer1-10.2.8.jolla
  • [mer] Migrated from OBS-only packaging to Git.

    python-urlgrabber

  • Updated : 3.9.1-1.1.1 — 3.9.1+mer1-10.2.5.jolla
  • [mer] Migrated from OBS-only packaging to Git. – Upgrade to 3.9.1 and enable spectacle Dropped all old patches except David’s libproxy one Integreted the updated version of libproxy patch, found in: https://bugzilla.redhat.com/show_bug.cgi?id=542224 – Correct SOURCE – Version update to 3.1.0 – Add dependency to m2crypto so that it can works with https connection fixed bug #1289 – Use libproxy to find proxy information

    qmf-activesync-plugin-all-translations

  • Updated : 0.4.4-10.2.1.jolla — 0.5.0-1.3.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    qmf-activesync-plugin-l10n

  • Updated : 1.63-10.3.1.jolla — 1.65.1-1.5.1
  • [l10n] Branched qmf-activesync-plugin from version 1.65
  • [l10n] Commit from Jolla localisation : 76 of 76 strings translated (0 need review).
  • [l10n] Commit from Jolla localization : 76 of 76 strings translated (0 need review).

    qmf-eas-plugin

  • Updated : 0.1.7-10.3.1.jolla — 0.2.0-1.4.7
  • [qmf-eas-plugin] No internet connection dialog when creating AS account.
  • [qmf-eas-plugin] Invitation response implementation.
  • [qmf-eas-plugin] Unable to forward message with multiple non-downloaded attachments.
  • [rpm] Bump versions
  • [sailfish-eas] Unable to forward message with multiple non-downloaded attachments.
  • [qmf-eas-plugin] OBS, oh please.
  • [qmf-eas-plugin] Clean up code.
  • [qmf-eas-plugin] don’t allow duplicate accounts creation.

    qmf-eas-plugin-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.2
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    qmf-eas-plugin-l10n

  • Updated : 1.23-10.3.1.jolla — 1.28.1-1.6.1
  • [l10n] Branched qmf-eas-plugin from version 1.28
  • [l10n] Commit from Jolla localisation : 67 of 68 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.11
  • [tpl] translation templates update for 0.2.0
  • [l10n] Commit from Jolla localization : 67 of 67 strings translated (0 need review).

    qmf-notifications-plugin-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.2
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    qmf-notifications-plugin-l10n

  • Updated : 1.35-10.3.1.jolla — 1.36.1-1.5.1
  • [l10n] Branched qmf-notifications-plugin from version 1.36
  • [l10n] Commit from Jolla localisation : 6 of 6 strings translated (0 need review).

    qmf-qt5

  • Updated : 4.0.4+git62-1.2.2 — 4.0.4+git63-1.3.5
  • [qmf] Initialize messagelistmodel before processing add/remove/update of messages.

    qmllive

  • Updated : 1.0.0+git3-10.2.1.jolla — 1.0.0+git4-1.3.1
  • [Bench] Added configurable limit on filesystem watches.
  • [Bench] Enabled simultaneous use by multiple users on the same machine
  • [Bench] Fixed assertion failure on double click in directory preview
  • [Bench] Fixed crash on exit when previewGenerator is running
  • [Bench] Fixed locating previewGenerator on Windows
  • [Bench] Fixed missing app icon and name on Mac.
  • [Runtime] Improved log output with blocking connect.

    qt5

  • Updated : 5.6.3+git2-1.3.1 — 5.6.3+git5-1.5.2
  • [mer][qtgui] Fix crash when a focused window’s surface is destroyed.
  • [qtbase] Fix expected signature from connman Scan method.

    qt5-feedback-haptics-droid-vibrator

  • Updated : 0.0.7-10.2.1.jolla — 0.1.0-1.3.8
  • [build] Conditional build for droid or native implementation.
  • [packaging] Add packaging for native vibrator.
  • [packaging] Droid vibrator conflicts with native.
  • [vibrator] Add native implementation.
  • [vibrator] Split implementation to hal.

    qt5-plugin-position-geoclue

  • Updated : 5.2.1+git25-1.2.1 — 5.2.1+git31-1.4.3
  • [mer][qtlocation] Fix QGeoSatelliteInfo connect/disconnect undefined slots from geoclue side.
  • [mer][qtlocation] Let satellite infos be hardware driven.
  • [mer][qtlocation] Move geocluetype registrations to geocluetypes.h.
  • [packaging] Ensure geoclue gets installed.
  • [ChangeLog][QtPositioning][Position] The Geoclue plugin has been
  • [ChangeLog][QtPositioning][QGeoPositionInfoSource] Report errors when
  • [mer][qtlocation] Fix build.
  • [mer][qtlocation] Remove dependency on libgeoclue.
  • [packaging] Cleanup libqtposition_geoclue.so.
  • [qtlocation] Start Geoclue client position interface asynchronously.
  • [QtLocation] Register needed metatypes.

    qt5-qpa-hwcomposer-plugin

  • Updated : 5.6.2.2-10.2.1.jolla — 5.6.2.3-1.3.12
  • [hwcomposer] initialize binder thread pool, add fake SurfaceFlinger service.
  • [hwcomposer] turn QPA_HWC_SYNC_BEFORE_SET into an environment variable.

    qt5-qtdeclarative

  • Updated : 5.6.3+git1-1.3.1 — 5.6.3+git5-1.5.1
  • [qtdeclarative] Fix crash in ModelNodeMetaObject::emitDirectNotifies.
  • [qtdeclarative] Keep 5.6.3 version id.
  • [qtdeclarative] Update to 5.6 branch head.

    qt5-qtimageformats

  • Updated : 5.6.2+git0-1.2.1 — 5.6.3+git1-1.3.2 Binaries removed : qt5-qtimageformats-plugin-dds
  • Unmet requirements: libwebp.so.7
  • [mer][qtimageformat] Upgrade to 5.6.3 and build webp against system package.

    qt5-qtlocation-source

  • Updated : 5.2.1+git27-1.3.2 — 5.2.1+git31-1.4.3
  • [mer][qtlocation] Fix QGeoSatelliteInfo connect/disconnect undefined slots from geoclue side.
  • [mer][qtlocation] Let satellite infos be hardware driven.
  • [mer][qtlocation] Move geocluetype registrations to geocluetypes.h.
  • [mer][qtlocation] Fix build.
  • [mer][qtlocation] Remove dependency on libgeoclue.

    qt5-qttools

  • Updated : 5.6.2+git9-1.3.2 — 5.6.3+git1-1.4.3
  • [qttools] Update to 5.6.3.

    qt5-qtwebkit

  • Updated : 5.6.2+git5-1.3.1 — 5.6.2+git7-1.4.3
  • Unmet requirements: libwebp.so.7
  • [mer][webkit] Don’t read textures as BGRA if QT_OPENGL_NO_BGRA is defined.
  • [webkit] Don’t read textures as BGRA if QT_OPENGL_NO_BGRA is defined.
  • [mer][qtwebkit] Enable same image quality options as Blackberry.
  • [mer][qtwebkit] Enable WebP support.

    rootfiles

  • Updated : 8.1-1.1.1 — 8.1+git2-1.3.1
  • [packaging] Drop %setup.
  • [packaging] Convert to tar_git format.
  • [update] Sync with upstream.

    rpm

  • Updated : 4.9.1.2-1.3.1 — 4.9.1.2-1.4.1
  • [rpm] Add –nobuildstage option to rpmbuild.

    sailfish-browser

  • Updated : 1.16.3-10.3.1.jolla — 1.16.9-1.4.16
  • [sailfish-browser] Do not treat empty url as local file.
  • [browser] Improve local file handling when opening a local externally.
  • [browser] Make to possible to force web content to portrait.
  • [browser] Adapt to changed Context Menu API.
  • [browser] Do not lower overlay if there are no open tabs.
  • [sailfish-browser] Improve geo location manual test.
  • [sailfish-browser] Add BROWSER environment variable.
  • [sailfish-browser] Use delayedClick signal for „Close all tabs“.

    sailfish-browser-l10n

  • Updated : 1.124-10.3.1.jolla — 1.127.1-1.5.1
  • [l10n] Branched sailfish-browser from version 1.127
  • [l10n] Commit from Jolla localization : 52 of 52 strings translated (0 need review).
  • [tpl] translation templates update for 1.16.4

    sailfish-btrfs-balancer-l10n

  • Updated : 1.14-10.3.1.jolla — 1.15-1.4.3
  • [l10n] Commit from Jolla localisation : 5 of 5 strings translated (0 need review).

    sailfish-components-accounts-qt5

  • Updated : 0.2.11-10.3.1.jolla — 0.2.13-1.5.2
  • [sailfish-accounts] Do not show cloud and other section header when not needed.
  • [sailfish-components-accounts] Don’t recompile lib for every test.

    sailfish-components-accounts-qt5-l10n

  • Updated : 1.51-10.3.1.jolla — 1.52-1.4.3
  • [l10n] Commit from Jolla localisation : 10 of 10 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.12

    sailfish-components-bluetooth-qt5

  • Updated : 0.2.10-10.2.1.jolla — 0.2.11-1.3.4
  • [bluetooth] Avoid creating unnecessary delegates for nearby devices.

    sailfish-components-bluetooth-qt5-l10n

  • Updated : 1.62-10.3.1.jolla — 1.65.1-1.5.1
  • [l10n] Branched sailfish-components-bluetooth-qt5 from version 1.65
  • [l10n] Commit from Jolla localization : 34 of 34 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.11

    sailfish-components-contacts-qt5

  • Updated : 0.2.7-10.3.1.jolla — 0.2.11-1.6.3
  • [components-contacts] Use common sharing page.
  • [contacts] Adapt to changed ContextMenu API.
  • [contacts] Added servicefilters to ContactSharePage.
  • [components-contacts] Use common delayedClick code.

    sailfish-components-contacts-qt5-l10n

  • Updated : 1.110-10.3.1.jolla — 1.113.1-1.5.1
  • [l10n] Branched sailfish-components-contacts-qt5 from version 1.113
  • [l10n] Commit from Jolla localization : 122 of 122 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.11
  • [l10n] Commit from Jolla localisation : 120 of 122 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.11
  • [tpl] translation templates update for 0.2.8
  • [tpl] translation templates update for 0.2.9

    sailfish-components-email-qt5

  • Updated : 0.1.1-10.2.1.jolla — 0.1.3-1.4.3
  • [components-email] Adapt to email composer cleanup and offer end destination.
  • [email] Removed Jolla strings.

    sailfish-components-email-qt5-l10n

  • Updated : 1.46-10.3.1.jolla — 1.50.1-1.6.1
  • [l10n] Branched sailfish-components-email-qt5 from version 1.50
  • [l10n] Commit from Jolla localisation : 3 of 3 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.3
  • [l10n] Commit from Jolla localisation : 3 of 3 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.2

    sailfish-components-filemanager

  • Updated : 0.1.13-10.2.1.jolla — 0.1.18-1.4.3
  • [components-filemanager] Use common sharing page.
  • [rpm] Bump up version and requimenents.
  • [sailfish-components-filemaner] Add archive support for storage.
  • [filemanager] Add servicefilters for add account button.
  • [sailfish-filemanager] Remove unused x-jolla.storage.error notification category.
  • [filemanager] Fix typo from SortingPage popping.

    sailfish-components-filemanager-l10n

  • Updated : 1.27-10.3.1.jolla — 1.31.1-1.6.1
  • [l10n] Branched sailfish-components-filemanager from version 1.31
  • [l10n] Commit from Jolla localisation : 52 of 52 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.18
  • [l10n] Commit from Jolla localisation : 53 of 53 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.15
  • [tpl] translation templates update for 0.1.16
  • [tpl] translation templates update for 0.1.17
  • Updated : 0.1.18-10.2.1.jolla — 0.2.3-1.4.3
  • [components-gallery] Use common sharing page.
  • [components-gallery] Support extra sharing options.
  • [Gallery] Removed add button creation from GallerySharePage.
  • [sailfish-components-gallery] Replace split view with overlay controls.
  • [sharing] Show account icon on sharing list.
  • Updated : 1.76-10.3.1.jolla — 1.86.1-1.6.1
  • [l10n] Branched sailfish-components-gallery-qt5 from version 1.86
  • [l10n] Commit from Jolla localisation : 53 of 53 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.4
  • [l10n] Commit from Jolla localization : 22 of 53 strings translated (31 need review).
  • [tpl] translation templates update for 0.2.2
  • [tpl] translation templates update for 0.2.3
  • [l10n] Commit from Jolla localization : 53 of 54 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.1
  • [l10n] Commit from Jolla localisation : 55 of 55 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.0

    sailfish-components-media-qt5

  • Updated : 0.1.9-10.2.1.jolla — 0.2.1-1.4.3
  • [sailfish-components-media] Use nemo-keepalive for DisplayBlanking.
  • [media] Allow disabling forward action if there is nothing to forward to.

    sailfish-components-pickers-qt5-l10n

  • Updated : 1.72.1-10.4.2.jolla — 1.75.1-1.6.1
  • [l10n] Branched sailfish-components-pickers-qt5 from version 1.75
  • [l10n] Commit from Jolla localisation : 32 of 39 strings translated (0 need review).

    sailfish-components-store

  • Updated : 0.0.11-10.2.1.jolla — 0.0.12-1.3.7
  • [sailfish-components-store] Add androidSupportInstalled property to StartupApplicationModel.
  • [sailfish-components-store] Add androidSupportStatus property to StartupApplicationModel.
  • [sailfish-components-store] Expose isInstalled invokable and packageInstalled signal.

    sailfish-components-telephony-qt5-l10n

  • Updated : 1.19-10.3.1.jolla — 1.20-1.4.3
  • [l10n] Commit from Jolla localisation : 14 of 14 strings translated (0 need review).

    sailfish-components-timezone-qt5-l10n

  • Updated : 1.63-10.3.1.jolla — 1.64-1.4.3
  • [l10n] Commit from Jolla localization : 691 of 691 strings translated (0 need review).

    sailfish-components-weather-qt5

  • Updated : 0.4.0-10.3.2.jolla — 0.4.2-1.5.5
  • [components-weather] Bump keepalive import to current version.
  • [components-weather] Fix feels-like property.

    sailfish-components-weather-qt5-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    sailfish-components-weather-qt5-l10n

  • Updated : 1.27-10.3.1.jolla — 1.36.1-1.8.1
  • [l10n] Branched sailfish-components-weather-qt5 from version 1.36
  • [l10n] Commit from Jolla localisation : 65 of 65 strings translated (0 need review).
  • [tpl] translation templates update for 0.4.1

    sailfish-components-webview-qt5

  • Updated : 0.0.20-10.3.1.jolla — 0.0.22-1.5.7
  • [components-webview] Use common sharing page.
  • [sailfish-webview] Do not show add account button label.

    sailfish-components-webview-qt5-l10n

  • Updated : 1.16-10.3.1.jolla — 1.18.1-1.5.1
  • [l10n] Branched sailfish-components-webview-qt5 from version 1.18
  • [l10n] Commit from Jolla localization : 34 of 34 strings translated (0 need review).
  • [tpl] translation templates update for 0.0.22

    sailfish-content-ambiences-default

  • Updated : 0.4.15-10.3.1.jolla — 0.4.16-1.4.6
  • [preload-ambiences] Use sparser ambience timestamps.

    sailfish-content-ambiences-default-favorites

  • Updated : 0.4.15-10.3.1.jolla — 0.4.16-1.4.6
  • [preload-ambiences] Use sparser ambience timestamps.

    sailfish-content-ambiences-default-l10n

  • Updated : 1.20-10.3.1.jolla — 1.22-1.5.3
  • [l10n] Commit from Jolla localisation : 18 of 19 strings translated (0 need review).

    sailfish-content-graphics-default

  • Updated : 0.9.3-10.3.1.jolla — 0.9.11-1.8.4
  • [signing] Add icon for Sign share action.
  • [secrets] Add icon for Keys settings page.
  • [jolla-ambient] Add sharing icon for mms copy to gallery.
  • [jolla-ambient] Archive cover graphic.
  • [archive] Upgrade archive folder and compressed file icons.
  • [archive] Add archive icons.
  • Icon button variants for the new content viewer design.

  • [theme-jolla-ambient] Add iso icon.

    sailfish-eas

  • Updated : 0.1.29-10.2.1.jolla — 0.2.3-1.3.6
  • [sailfish-eas] Adding custom fields support for meeting invitations. Always forward meeting invitations using SmartForward.
  • [sailfish-eas] Attachments are not shown in meeting invitations with attachments.
  • [sailfish-eas] Unable to forward message with multiple non-downloaded attachments.
  • [sailfish-eas] Fixes always-on mode for EAS accounts. Re-creates network managers after switch of a network or going from offline to online and vice versa.
  • [sailfish-eas] MeetingResponse request should always remove temporary created response emails.
  • [sailfish-eas] Cannot download attachments from Zimbra (OMP) account.
  • [sailfish-eas] Make sure that DeviceID is an alphanumeric value.

    sailfish-fonts

  • Updated : 0.1.4-10.1.1.jolla — 0.1.5-1.3.4
  • [packaging] Depend on fontpackages-filesystem.

    sailfish-maps

  • Updated : 1.1.28-10.2.2.jolla — 1.1.32-1.4.6
  • [sailfish-maps] Update nemo imports to Nemo naming.
  • [sailfish-maps] Remove usage of MapMouseArea.
  • [sailfish-maps] Don’t move to current position on press and hold.
  • [sailfish-maps] Remove notification category leftover.
  • [sailfish-maps] Don’t flash main screen on dbus activation.

    sailfish-maps-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    sailfish-maps-l10n

  • Updated : 1.79-10.3.1.jolla — 1.81.1-1.5.1
  • [l10n] Branched sailfish-maps from version 1.81
  • [l10n] Commit from Jolla localisation : 89 of 89 strings translated (0 need review).
  • [tpl] translation templates update for 1.1.30

    sailfish-mdm

  • Updated : 0.2.67-10.3.1.jolla — 0.2.72.3-1.8.2
  • Unmet requirements: sailfish-mdm-ofono-plugin >= 1.0.4
  • [sailfish-mdm] Document explicit privileged group for now.
  • [sailfish-mdm] Use PackageKit directly for package installations.
  • [sailfish-mdm] Sync device lock API enums.
  • [packaging] Bump version to 0.2.72.1.
  • [simfilters] Fix Action->int conversion for SimFilter::Rule and fix warnings.
  • [simfilters] Fix SimFilter signal emission for added/removed/changed and add tests.
  • [mdm] Add user feedback options to the device lock lockout.
  • [simfilters] Add SimMobileDataFilter.
  • [simfilters] Move ‚Action‘ and ‚TextRule‘ enums to SimFilter.
  • [simfilters] Remove SimSmsFilter::textRuleChanged() and change signal behavior.
  • [mdm] Don’t fail on policy-updater if device doesn’t have camera files configured.
  • [libsailfishmdm] Only allow flight mode policy changes if policy is enabled.
  • [libsailfishmdm] Simplify flight mode toggling in mdm-tool.
  • [sailfish-mdm-examples] Add flight mode to examples.
  • [sailfish-policy] Add flight mode policy settings.
  • [libsailfishmdm] Add SimSmsFilter class and use it from mdm-tool.

    sailfish-mdm-demo

  • Updated : 0.1.8-10.3.1.jolla — 0.2.0-1.4.83
  • [mdm-demo] Build libaccesscontrol variant from master.

    sailfish-mdm-l10n

  • Updated : 1.5-10.2.1.jolla — 1.8.1-1.5.1
  • [l10n] Branched sailfish-mdm from version 1.8
  • [l10n] Commit from Jolla localisation : 4 of 4 strings translated (0 need review).

    sailfish-minui

  • Updated : 0.0.2-10.2.1.jolla — 0.0.3-1.3.1
  • [minui] Press releases not sometimes being recognized.

    sailfish-office

  • Updated : 1.3.10-10.2.1.jolla — 1.3.13-1.5.5
  • Unmet requirements: libpoppler.so.73
  • [office] Removed accidental Content property from the sharingpage.
  • [office] ServiceFilters for Add account button.
  • [sailfish-office] Add privileges for account handling.

    sailfish-office-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.2
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    sailfish-office-l10n

  • Updated : 1.90-10.3.1.jolla — 1.94.1-1.6.1
  • [l10n] Branched sailfish-office from version 1.94
  • [l10n] Commit from Jolla localization : 57 of 57 strings translated (0 need review).
  • [tpl] translation templates update for 1.13.12
  • [l10n] Commit from Jolla localisation : 58 of 58 strings translated (0 need review).

    sailfish-tutorial

  • Updated : 0.1.37-10.2.1.jolla — 0.1.38-1.3.7
  • [tutorial] Don’t allow flicking over target item in Homescreen carousel demo.

    sailfish-tutorial-l10n

  • Updated : 1.49-10.3.1.jolla — 1.52.1-1.6.1
  • [l10n] Branched sailfish-tutorial from version 1.52
  • [l10n] Commit from Jolla localisation : 97 of 98 strings translated (0 need review).

    sailfish-upgrade-ui-l10n

  • Updated : 1.5.2-10.3.1.jolla — 1.10.1-1.5.1
  • [l10n] Branched sailfish-upgrade-ui from version 1.10
  • [l10n] Commit from Jolla localization : 3 of 3 strings translated (0 need review).
  • [tpl] translation templates update for 0.0.4
  • [l10n] Commit from Jolla localization : 3 of 3 strings translated (0 need review).

    sailfish-utilities

  • Updated : 0.1.6-10.2.2.jolla — 0.1.7-1.3.4
  • [utilities] Fix clearing tracker database.

    sailfish-utilities-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    sailfish-utilities-l10n

  • Updated : 1.48-10.3.1.jolla — 1.49-1.4.3
  • [l10n] Commit from Jolla localisation : 19 of 19 strings translated (0 need review).

    sailfish-version

  • Updated : 2.1.4-10.3.14.jolla — 2.2.0-1.5.29
  • Binaries added : sailfish-version-variant – 2.2.0-1.5.29
  • Unmet requirements: sailfish-release-variant
  • [version] Change name for 2.1.5 (Mouhijoki).
  • [version] Rename 2.1.5 version to 2.2.0.
  • [os-release] Fix NAME= field.
  • [packaging] Add variant subpackage.
  • [os-release] Make symbolic link relative.

    sailfish-weather-all-translations

  • Updated : 0.4.4-10.3.1.jolla — 0.5.0-1.4.1
  • [all-translations] Add sailfish-archive, sailfish-secrets and -ui.

    sailfish-weather-l10n

  • Updated : 1.21-10.3.1.jolla — 1.23.1-1.5.1
  • [l10n] Branched sailfish-weather from version 1.23
  • [l10n] Commit from Jolla localisation : 23 of 23 strings translated (0 need review).

    sailfishsilica-qt5

  • Updated : 0.25.5-10.3.1.jolla — 0.26.10-1.8.6
  • [sailfishsilica] Allow overriding Slider coloring.
  • [silica] Menu items can not be selected during open animation.
  • [sailfishsilica] Map mime/type and archive folder.
  • [doc] Fix context command usage
  • [doc] Fix links
  • [silica] Capitalize weekdays and months in sections.
  • [silica] Fix pending page navigation indicators used in dialogs.
  • [silica] Rename PageNavigation.None to PageNavigation.NoNavigation
  • [doc] Fix ProgressBar reference in the introduction page
  • [doc] Fix the type of ComboBox::currentItem property.
  • [silica] Allow customizing dismiss button click action.
  • [api] Add return to deprecated ListItem::showMenu.
  • [sailfishsilica] Set implicit width for buttons before initialing initial layout parameters.
  • [sailfishsilica] Allow overriding device size category.
  • [passwords] Expose TextInput’s passwordMaskDelay and length in TextField.
  • [sailfishsilica] Expose temporary location from StandardPaths.
  • [sailfishsilica] Support vertical page stack navigation.
  • [silica] Add formatter support for date full without year.
  • [silica] Remove glass image provider.
  • [remorse] Allow swiping remorse items away.
  • [sailfishsilica] Include simple FramerateMonitor for convenience.
  • [silica] Add support for ProgressBar highlight.
  • [sailfishsilica] Support extra small Silica button variant.
  • [sailfish-silica] Fix immediate show and hide of Drawer.
  • [sailfish-silica] Introduce first logging categories and suppress debug logs.
  • [silica] Make ProgressBar height scale on content.
  • [sailfish-silica] Fix inconsistent open/close vs show/hide functions.

    sailfishsilica-qt5-l10n

  • Updated : 1.91-10.3.1.jolla — 1.94.1-1.6.1
  • [l10n] Branched sailfishsilica-qt5 from version 1.94
  • [l10n] Commit from Jolla localisation : 103 of 104 strings translated (0 need review).
  • [tpl] translation templates update for 0.26.7
  • [l10n] Commit from Jolla localisation : 84 of 85 strings translated (0 need review).
  • [tpl] translation templates update for 0.26.1

    sbj-configs

  • Updated : 0.11.0.1-10.4.1.jolla — 0.12.3-1.4.8
  • [policy] Use correct identifier for a2dp devices.
  • [sbj] Update img2simg binary name.
  • [ks] Make releasename more tolerant for errors.
  • [sbj] Remove patterns and use meta packages.

    sd-utils

  • Updated : 0.1.3-1.1.1 — 0.1.5-1.3.2
  • [sd-utils] Prepare sd-utils deprecation.

    sdk-configs

  • Updated : 0.106-10.3.3.jolla — 0.110-1.6.29
  • [ssu] Add tools repo, disable mer-tools by default.
  • [ks] Change use of sailfish-release to os-release.
  • [ssu] Do not suggest developer-mode feature.
  • [ks] Update after

    sdk-setup

  • Updated : 1.2.2-10.4.1.jolla — 1.2.10-1.7.1
  • [mb2] Imply -x in app SDK when version in spec is 0.
  • [mb2] Fix version also during qmake/make/install commands.
  • [mb2] Do not fail on modified git submodules.
  • [sdk-setup-enginelan] Prevent ConnMan setting an invalid gateway.
  • [sdk-assistant] Avoid ambiguity in options processing.
  • [sdk-assistant] Fix detecting tarball type.
  • [mb2] Do not produce short-circuited RPMs.
  • [sdk-manage] Prevent accidental concurrent use.

    sdk-webapp

  • Updated : 0.7.2-10.4.1.jolla — 0.7.3-1.4.1
  • [sdk-webapp] Fix mouse-hover on update button.
  • [sdk-webapp] Refresh after updating tooling.

    sdk-webapp-sailfish

  • Updated : 0.17-10.1.1.jolla — 0.18-1.3.1
  • [webapp] Use HTTPS to download targets.json.

    sensorfw-qt5

  • Updated : 0.9.4-1.2.1 — 0.9.7-1.4.1
  • [systemd] Make sensorfwd wait for oneshot-root.service.
  • [patch] Take patches from LuneOS. Fixes MER#1879
  • [cleanup] Remove gyroadaptor-evdevplugin.h.autosave file
  • [doc] Make @file tags match the actual filenames
  • [PATCH] Implement luna-service integration
  • [PATCH] Replace android headers hard-coded include path with pkgconfig
  • [PATCH] sensord-daemon-conf-setup: improve check for libhybrissensorfw

    shared-mime-info

  • Updated : 1.2+git3-1.1.1 — 1.9-1.3.1
  • [packaging] Drop upstreamed patch, drop rpmlintrc.
  • [rebase] x-vnote patch.
  • [update] Update to version 1.9.

    simkit-l10n

  • Updated : 1.42-10.3.1.jolla — 1.44.1-1.5.1
  • [l10n] Branched simkit from version 1.44
  • [l10n] Commit from Jolla localisation : 14 of 14 strings translated (0 need review).

    sociald

  • Updated : 0.1.64-10.3.2.jolla — 0.1.66-1.4.6 Binaries removed : sociald-facebook-notifications
  • [sociald] Fix name of old facebook plugin package.
  • [buteo-sync-plugins-social] Remove Facebook Notifications sync plugin.

    sociald-l10n

  • Updated : 1.69-10.3.1.jolla — 1.70-1.4.3
  • [l10n] Commit from Jolla localisation : 11 of 11 strings translated (0 need review).

    sp-endurance

  • Updated : 4.2.0-10.2.1.jolla — 4.3.1-1.5.2
  • [packaging] Depend on findutils.
  • [endurance-plot] show /etc/os-release, /etc/system-release content in graphs
  • [endurance-recompress-snapshots] compress sysfs_fs, sysfs_cpu, sched
  • [endurance-recompress-snapshots] fix .gz file recompression
  • [measure/endurance-snapshot] collect /proc/softirqs
  • [measure/endurance-snapshot] compress sysfs_cpu, sysfs_fs
  • [measure/endurance-snapshot] NO_SYSLOG=1 to skip syslog & journal log collection
  • [measure/endurance-snapshot] proc2csv, sp-noncached from script directory
  • [measure/endurance-snapshot] simpler smaps.cap capture unless sp_smaps_snapshot is available
  • [postproc-lib] add MemAvailable, AnonPages to system_memory_1 graph
  • [postproc-lib] always use [0,120] yrange in CPU utilization plots
  • [postproc-lib] avoid div-by-zero error in generate_plot_cpu_suspend_time()
  • [postproc-lib] fix /proc/pid/status parsing in 4.7+
  • [postproc-lib] gnuplot noenhanced terminal
  • [postproc-lib] include script name in python and perl processes
  • [postproc-lib] per-cpu utilization plots, add steal, guest, guest_nice
  • [postproc-lib/README] add note how to run the unit tests
  • [postproc-lib/README] fedora installation example
  • [postproc-lib] skip sleeping and idle task states in csv_proc_pid_stat()
  • [postproc-lib] smaps data parsing without /proc/pid/status data
  • [postproc-lib] softirqs parsing and plotting
  • [postproc-lib] swapless ‚private dirty‘ graphs
  • [postproc-lib/t/Parser.t] add more one smaps testcase
  • [postproc-lib] try NAME from /etc/system-release if PRETTY_NAME not defined
  • [postproc-lib] update task state descriptions in generate_plot_process_state_count()
  • [rpm] update version to 4.3.0.
  • [src/proc2csv.c] capture more characters from cmdline
  • [src/proc2csv.c] handle larger PIDs
  • [src/proc2csv.c] ignore file open errors in show_proc_pid_stat()
  • [src/proc2csv.c] null terminate string after snprintf() in show_proc_pid_stat()

    sp-rich-core

  • Updated : 1.74.13-10.1.2.jolla — 1.74.14-1.3.4
  • [packaging] Depend on findutils.

    sp-smaps

  • Updated : 0.4.2-10.2.1.jolla — 0.4.2.2-10.2.4.jolla No new changelog entries!

    spectacle

  • Updated : 0.30-1.5.1 — 0.30-10.2.4.jolla
  • [packaging] Fix QA issues with changelog. – Add support for qmake5 Builder (by sage) – Add armv6 to architecture list (by kulve) – Make „%{summary}.“ the default description (by sage) – Drop SupportOtherDistros, Documents and PostScript support from yaml (by sage) – Update pkgconfig-provides.csv (by sage) – Warn if URL is not set in .yaml (by sage) – Improve test case coverage (by sage) – Release 0.18, with the following changes: specify: – Support new builder: ‚qmake‘ – Added all sub-package specific keywords, including: – License – Version, Release, Epoch – NoAutoreq, NoAutoprov – BuildArch – URL – Added the following new keywords: – BuildConflicts – Prefix – More precise duplicate checking for customized spec part: – duplicate ‚/sbin/ldconfig‘ in %post/postun – duplicate scripts for special files handling: Info, Desktop, Icon, Schema, etc – duplicate „%defattr“ line in %files – Checking for valid configure/builder values – Checking for valid keywords for sub-packages – Warning for PkgBR/PkgConfigBR in sub-packages – Added Icon/Scheme auto-handling for sub-packages spec2spectacle: – Fixed bugs in parsing of Perl packages‘ spec – More old spec directives support: Prereq, BuildConflicts – Release 0.17, with the following changes: specify: – Add compatible support for older ‚OtherDistros‘ – More precise handling for .desktop in packages – Better match rules for desktop files and info files – Newkey ‚UpdateDesktopDB‘ to do the ‚update-desktop-database‘ operation in a explicit way – More precise handling for python module installation path spec2spectacle: – Fixings for macro definitions‘ parsing – Update to 0.16, with the following changes: specify: – New key ‚NoDesktop‘ to skip desktop files in package – New key ‚RpmLintIgnore‘ to ignore rpmlintrc – README updated with new MeeGo information – Fixed modules installation path in Debian/Ubuntu system – Update to 0.15, with the following changes: specify: – Architecture namespace support – supported archs: ix86, arm – supported keywords: Requires, PkgBR, PkgConfigBR, Patches, ConfigOptions – New keyword ‚NoFiles‘ to support empty main package – Customized %pre/preun/post/postun scripts for sub-packages – Precise duplicate checking for auto-generated Requires – More proper automatic processing for Icons files – More proper automatic processing for Desktop files – More proper automatic processing for share libraries – Decent handling for exceptions of YAML errors and key interrupts spec2spectacle: – More tolerance for problems in input spec – Parsing for customized %pre/preun/post/postun scripts of sub packages – More helping warning messages doc and testsuites: – new cases for new features – README, as the reference, updated according all changes – Add lost requires for ‚python-cheetah‘, fixed BMC#779 – Update to 0.14, with the following changes: specify: – Proposals for pkgconfig requires to replace buildrequires – Checking for MeeGo approved Groups – series.conf support for ‚Patches‘, with more friendly comments – Support for new builder: ‚qmake‘, ‚perl‘ – Accurate checking for mandatory/invalid/empty keys, and checking for the types of all keys – More customized scripts in spec for %pre/preun/post/postun sections – Testsuites: the spectacle specific testing framework and about 45 cases to cover the most features‘ checking – Automatic locale data including, if found ‚intltool‘ in PkgBR, find_lang rpm macro will be inserted to spec to search locale data, but ‚NoAutoLocale‘ keyword can suppress it. – New keywords: – ‚ExclusiveArch‘ of the corresponding spec one – ‚Files‘ to enable putting file list in YAML for small packages – ‚AutoDepend‘ to enable/disable automatic requires for sub-pkg – ‚AsWholeName‘ to make sub-pkg use its name without the main package name as prefix. („-n“ options in spec) – Dropped ‚PostScripts‘ key, use customized „%post“ in spec instead – Renamed ‚NeedCheckSection‘ to ‚Check‘, with compatibily support for all renamed/dropped keys. spec2spectacle: – Support parsing of %pre/preun/post/postun scripts – Support parsing of %check section in spec – Support parsing of „-n“ and „-p“ options of spec headers – More accurate parsing of pkgconfig build requires – Update to 0.13, with the following changes: – Added python-urlgrabber to ‚Requires‘ – Added new document to package: TODO and examples/ Changes of features: – Support fdupes – Add new key ‚NoSetup‘ and ‚SetupOptions‘ and new customized section „>> setup“ for %setup customization. – Include YAML file as Source100. – Enhaneced message printing: colorized and different levels: – info/warning/error/ask – ini2spec: Skip missed *.desc files and leave ‚Description‘ empty with warning printing. – Type checkings for all list-typed tags – Add date string to generated spec. – Try to find out the source prefix path from tarballs if ‚SourcePrefix‘ not specified. – Using urlgrabber to download src files for several advantages. – Give info about possible usage of pkgconfig to replace BuildRequires, based on a predefined database(pkgconfig-provides.csv). – Checking for proved MeeGo Groups. – More careful checking for duplicates values for auto-generated ones: – sub-pkg’s ‚Requires‘ of base package – ‚–disable-static‘ of ConfigOptions – ‚defattr(-,root,root,-)‘ in %files – Static library detect and automatic handling – Add perl package support. – Tools‘ cmdln options changes: need not to specify file path now, tools will search in CWD with expected ext names. – Add support for UseAsNeeded/NoAutoReq/NoAutoProv boolean keys – Use the value ‚configure‘ as the default value of ‚Configure‘ tag. – Cleanup obsoletes files to backup sub-dirs: all spec-builder files and origin spec file, in converter tools. – Other bug fixings and minor changes… – update to 0.11, with the following changes: Changes of features: – download newer source package automatically – new optional YAML key ‚SourcePrefix‘ to specify the prefix path for tarballs – new optional YAML key ‚FilesInput‘ to specify extra %files input file in spec – new optional YAML key ‚SupoprtOtherDistros‘ to support other distros explicit – complete the support for Requires(pre/post/preun/postun)/Conflicts/Provides/Obseletes for both main package and sub packages – support Epoch spec directive – support %check spec section – more convenient cmdln options for all tools – update to 0.10, many features and fixes were added – Update to 0.9, new tool spec2spectacle added – Add python-cheetah to BuildReq – Update to 0.7 – Update to 0.6

    ssu

  • Updated : 0.43.6-1.3.2 — 0.43.9-1.5.3
  • [ssuks] Allow to inhibit implicit feature suggestions.
  • [ssu] Expose deviceVariant to repository urls.
  • [ssu] Make deviceFamily fallback to deviceVariant.
  • [ssu] Expose Ssu to QML.

    ssu-repos

  • Updated : 0.104-10.5.1.jolla — 0.105-1.5.2
  • [ks] Attach os-release extended with customer info.

    ssu-sysinfo

  • Updated : 1.1.2-1.2.1 — 1.1.3-1.4.2
  • [ssu-sysinfo] Glob hw-settings ini files.
  • [ssu-sysinfo] Handle semicolon as comment.

    store-client

  • Updated : 0.12.8-10.7.1.jolla — 0.13.1.3-1.8.1
  • Binaries added : sailfish-installationhandler – 0.13.1.3-1.8.1
  • Unmet requirements: liblipstick-qt5.so.0
  • [store-client] Match server and os-release versions with plus postfix.
  • [store-client] Fix os update getting canceled instantly.
  • [store-client] Partly revert „Remove os update UI methods from d-bus interface“.
  • [store-client] Release cover image for 2.2.0.
  • [jolla-store] Separate some actions to own daemon.
  • [store-client] Update package list upon external uninstallations.
  • [store] Fix compilation warning on Q_PROPERTY WRITE + CONSTANT.
  • [store-client] Use MenuItem delayedClick instead of custom delay.
  • [sailfish-upgrade] Remove old enablers for the upgrade UI.
  • [store-client] Take vertical page navigation in use in screenshot carousel.

    store-client-l10n

  • Updated : 1.124-10.3.1.jolla — 1.135.1-1.8.1
  • [l10n] Branched store-client from version 1.135
  • [l10n] Commit from Jolla localization : 142 of 142 strings translated (0 need review).
  • [tpl] translation templates update for 0.13.3
  • [tpl] translation templates update for 0.14.0
  • [tpl] translation templates update for 0.14.1
  • [l10n] Commit from Jolla localization : 148 of 148 strings translated (0 need review).
  • [l10n] New files added from Jolla localization based on templates
  • [tpl] translation templates update for 0.12.11
  • [tpl] translation templates update for 0.13.0

    sudo

  • Updated : 1.8.6p3-2.3.1 — 1.8.20p2-10.2.3.jolla
  • [packaging] Update to upstream release 1.8.20p2. – New upstream release
  • [packaging] Convert from gitpkg/pristine-tar to tar_git.
  • [packaging] Fix bad indentation in rpm/sudo.changes.

    transferengine-plugins

  • Updated : 0.1.9-10.2.1.jolla — 0.2.3-1.5.6
  • [transferengine-plugins] Support destination page after sharing.
  • [tranferengine-plugins] Change Jolla to Sailfish OS.
  • [transferengine-plugins] Polish and remove unnnecessary private import.
  • [sharing] Show account icon on sharing list.

    transferengine-plugins-l10n

  • Updated : 1.84-10.3.1.jolla — 1.91.1-1.7.1
  • [l10n] Branched transferengine-plugins from version 1.91
  • [l10n] Commit from Jolla localisation : 61 of 61 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.4
  • [l10n] Commit from Jolla localisation : 61 of 61 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.3
  • [l10n] Commit from Jolla localization : 61 of 61 strings translated (0 need review).
  • [tpl] translation templates update for 0.2.1
  • [tpl] translation templates update for 0.2.2

    ui-democontent

  • Updated : 0.9.10-10.3.1.jolla — 1.0.3-1.4.34
  • Binaries added : ui-democontent-preload-eu – 1.0.3-1.4.34, ui-democontent-settings – 1.0.3-1.4.34, ui-democontent-fake-operator-telia – 1.0.3-1.4.34
  • [settings] Add placeholders for couple security settings.
  • [contacts] Update contacts.
  • [packaging] Add fake operator package.
  • [packaging] Add eu-demo preload content package.

    usb-moded

  • Updated : 0.86.0+mer20-1.2.2 — 0.86.0+mer23-1.4.3
  • [dsme] Make dsme message type identifiers unique.
  • [config] Do not switch from undefined mode to charging fallback.
  • [dbus] Log incoming D-Bus messages in verbose mode
  • [doc] Fix Doxygen tagging issues
  • [usb-moded] Do not disable warnings that affect code quality
  • [usb-moded] Forget stale timer id
  • [usb-moded] Move usb_mode structure away from header
  • [usb-moded] Tune global variables
  • [android] Do not require android configuration block.
  • [build] Fix „implicit declaration of function“ compilation warning

    vm-configs

  • Updated : 0.15-10.5.6.jolla — 0.15.5-1.6.37
  • [ssu] Add tools repo, disable mer-tools by default.
  • [ssu] Suggest customer-jolla-sdk feature.
  • [vm-configs] Do not declare BuildRequires ssu-vendor-data-jolla.
  • [vm-configs] Do not declare Provides ssu-vendor-data.
  • [ssu] Do not suggest developer-mode feature.
  • [ks] Rename images including proper version ID.
  • [ks] Make systemd quiet during startup.

    voicecall-ui-jolla

  • Updated : 0.10.14-10.2.1.jolla — 0.10.18.1-1.4.2
  • [voicecall-ui] Fix missed call today having bad context menu.
  • [voicecall-ui] Move glass image provider here from Silica.
  • [voicecall-ui-jolla] Create Bluetooth audio object on-demand.
  • [calllog] Display start time on over day old logs.

    voicecall-ui-jolla-l10n

  • Updated : 1.166-10.3.1.jolla — 1.175.1-1.8.1
  • [l10n] Branched voicecall-ui-jolla from version 1.175
  • [l10n] Commit from Jolla localisation : 203 of 203 strings translated (0 need review).
  • [tpl] translation templates update for 0.10.19
  • [tpl] translation templates update for 0.10.22
  • [tpl] translation templates update for 0.10.23
  • [l10n] Commit from Jolla localization : 203 of 203 strings translated (0 need review).
  • [tpl] translation templates update for 0.10.17
  • [l10n] Commit from Jolla localization : 203 of 203 strings translated (0 need review).
  • [tpl] translation templates update for 0.10.16
  • [l10n] Commit from Jolla localisation : 203 of 203 strings translated (0 need review).
  • [tpl] translation templates update for 0.10.15

    xdg-user-dirs

  • Updated : 0.14-1.1.1 — 0.16+git1-1.3.1
  • [packaging] Add NOCONFIGURE option to autogen.sh
  • [packaging] Update to version 0.16.
  • [license] Unify open source licenses.

    xdg-utils

  • Updated : 1.1.1-1.1.1 — 1.1.2+git1-1.3.1
  • Binaries added : xdg-utils-doc – 1.1.2+git1-1.3.1
  • [xdg-utils] Update to 1.1.2 and change to git submodule.
  • [lca] lca-tool has to be tried for local files before the generic open method. Fixes MER#971.
  • [xdg-utils] Updated to 1.1.1.
  • [xdg-utils] Remove unused patch and modify changelog.
  • Added patch for generation of txt files; pulled in clean Vanilla upstream build

Packages added

ambience-sailfish3

  • Binaries added : ambience-sailfish3 – 0.0.4-1.2.36, ambience-sailfish3-ts-devel – 0.0.4-1.2.36, ambience-sailfish3-default-ambience – 0.0.4-1.2.36
  • Unmet requirements: ambience-sailfish3 = 0.0.4-1.2.36
  • [ambiences] Add new Silent and Cloudberry ambiences.
  • [flow] add also flow ambience by default.
  • [ambience] Update ambience photo.
  • [ambience] Update with draft photo.
  • [ambience] Create Sailfish 3 ambience project.

    createrepo_c

  • Binaries added : createrepo_c – 0.10.0+git1-10.1.1.jolla, python2-createrepo_c – 0.10.0+git1-10.1.1.jolla, createrepo_c-devel – 0.10.0+git1-10.1.1.jolla, createrepo_c-libs – 0.10.0+git1-10.1.1.jolla
  • Unmet requirements: createrepo_c-libs = 0.10.0+git1-10.1.1.jolla, createrepo_c-libs(armv7hl-32) = 0.10.0+git1-10.1.1.jolla, createrepo_c-libs(x86-32) = 0.10.0+git1-10.1.1.jolla, libcreaterepo_c.so.0
  • [createrepo_c] Add rpm packaging.

    droid-config-f5122

  • Binaries added : droid-config-f5122-preinit-plugin – 1.0.9-1.7.5, droid-config-f5122-pulseaudio-settings – 1.0.9-1.7.5, droid-config-f5122-flashing – 1.0.9-1.7.5, droid-config-f5122-policy-settings – 1.0.9-1.7.5, droid-config-f5122-patterns – 1.0.9-1.7.5, droid-config-f5122-bluez4 – 1.0.9-1.7.5, droid-config-f5122-sailfish – 1.0.9-1.7.5, droid-config-f5122-ssu-kickstarts – 1.0.9-1.7.5, droid-config-f5122-bluez5 – 1.0.9-1.7.5, droid-config-f5122 – 1.0.9-1.7.5, droid-config-f5122-out-of-image-files – 1.0.9-1.7.5, droid-config-f5122-kickstart-configuration – 1.0.9-1.7.5
  • Unmet requirements: f5122-bluez-configs, droid-config-f5122 = 1.0.9, droid-config-f5122 = 1.0.9-1.7.5
  • [ks] Calculate factory image size properly.
  • [ks] Include os and hw release files inside image zip.
  • [ks] Remove extra „-“ from release image name.
  • [f5121] Add sailfish img resize fix.
  • [f5121] Update submodule and remove 999-droid-system-bootdevice.rules.
  • [f5121] Add udev rule to ignore internal card.
  • [f5121] Enable PulseAudio usbaudio configs.
  • [performance] Improve HWC performance.
  • [zram] Enable zram swap.
  • [camera] Force autofocus mode for photos, and continuous for video.
  • [sailfish-fpd] Disable some quirks after fp hal update.
  • [config] Adjust peekfilter.
  • [f5122] Add modem config.
  • [f512x] Cleanup rpm dir to ease promotions
  • [f512x] Cleanup rpm dir to ease promotions. MER#1880
  • [systemCheck.d] Relax droid-hal-*.
  • [packaging] Add F5122 configs.
  • [patterns] Refactor for both SIM variants
  • [patterns] Require device specifi droid-system.
  • [sailfish-fpd] Add configuration file.
  • [f5121] Update upstream d-h-c.
  • [f5121] Use PulseAudio 11.1.
  • [ks] Update img2simg usage command.
  • [f5121] Use fingerprint daemon device lock.
  • [flashing] Improve version check.
  • [flashing] Make it possible to define blob path.
  • [ks] Take use of SAILFISH_CUSTOMER in image naming.
  • [f5121] Duck media streams less.
  • [f5121] Enable media notify for alarm.
  • [f5121] Update upstream d-h-c.
  • [ks] Use os-release.
  • [patterns] Drop apkd-configs-home.
  • [ks] Make releasename more tolerant for errors.
  • [f5121] Add mce memnotify limits.
  • [camera] Support ISO 1600.
  • [f5121] Use native vibrator.
  • [camera] Added camera quirks.
  • [f5121] Upgrade droid-configs-device from upstream.
  • [f5121] Use property flags for classification.
  • [configs] Don’t fail PulseAudio startup if module-droid-glue fails to load.
  • [f5121] Upgrade droid-configs-device from upstream.
  • [f5121] Show reboot dialog on SIM removal.
  • [camera] Drop video recording to 1080p, as we’re dropping frames at 4k.
  • [camera] Drop video recording to 1080p.
  • [flashing] Add more comments for script execution.
  • [flashing] Improve windows flash script error checks.
  • [flashing] Fix issues on macOS use of flash.sh.
  • [droid-config-f5121] Support ISO 800.
  • [flash] Defer unlocking instructions to Sony website.
  • [win] Add windows EOL conversion.
  • [win] Convert text files to DOS format for easier reading on Windows.
  • [win] Escape special characters on echo.
  • [f5121] Fix packaging for removed and renamed files.
  • [flash] Update extracting and flashing instructions. Remove incomplete Windows fastboot driver.
  • [flash] Update flash scripts and documentation.
  • [oem] Tighten up device and blob image checking.
  • [f5121] Vendor binaries are now under /odm (handled by dhd). MER#1824
  • [f5121] Add mapplauncherd-booster-silica-qt5-media for default configuration.
  • [camera] Add focus modes to front camera.
  • [flashing] Improve flashing guidance.
  • [f5121] Linux: flashing the vendor image. MER#1821
  • [f5121] Make version comparison more robust. MER#1821
  • [flashing] Improve windows flashing script
  • [f5121] Mount oem partition instead of cache to /system/vendor.
  • [flashing] Improve guidance.
  • [flashing] Improve linux flashing script to match windows version.
  • [ks] Make .zip instead of .tar.bz2.
  • [vendor] Flash the vendor blob image.
  • [f5121] Pull camera key handling from upstream. Contributes to MER#1817
  • [f5121] Ship hybris-recovery.img in the installation tarball. MER#1819
  • [lvm] Handle cases when partition is already minimal. MER#1820
  • [zypp] Perform systemCheck only on OBS. MER#1807
  • [f5121] Check unlocked device on win flashing.
  • [f5121] Fix windows flashing script.
  • [config] Use proper card profile with pulseaudio.
  • [dhc] Upgrade droid-configs-device from upstream
  • [f5121] Add windows flashing support.
  • [f5121] Update latest fastboot driver from upstream.
  • [flash-win] Check installed android version.
  • [bluetooth] Copy bt mac address so system settings can find the address.
  • [f5121] Add configuration for bluetooth.
  • [f5121] Change xt9 from preload to Imager feature.
  • [f5121] Remove jolla-store-apps from Imager features.
  • [patterns] Add bluetooth-rfkill-event-hciattach.
  • [dhc] Enable community adaptations also for productised devices.
  • [f5121] Adjust touch screen feedback volume.
  • [f5121] Upgrade upstream droid-config device.
  • [f5121] Do not filter lid sensor reporting based on als state.
  • [f5121] Replace CUSTOMCONTEXT_NO_BGRA with QT_OPENGL_NO_BGRA.
  • [f5121] Ensure make_ext4fs is executable.
  • [f5121] Relax upstream versioning.
  • [sensors] Re-enable Hall sensor as f5121 really does have one.
  • [mce] Add doubletap configuration file for f5121.
  • [mce] Add doubletap settings file for f5121.
  • [f5121] Add aliendalvik-feature to suggested feature.
  • [theme] Increase launcher icon size and sync pixel ratios.
  • [touch] Automatically scale start drag distance if pixel ratio is known.
  • [upstream] Update latest droid-configs-device
  • [f5121] Add apkd-config-home to pattern.
  • [f5121] Include f_bcmdhd_apsta.bin and fw_bcmdhd.bin binaries to image.
  • [f5121] Move vendor mounting systemd link to the right place.
  • [f5121] Make binary blobs from the zip file executable.
  • [f5121] Prevent future droid-system updates from failing with „Read-only file system“.
  • [f5121] Install the mount unit properly.
  • [f5121] Provide make_ext4fs separately due to conflict with package’s noarch.
  • [f5121] Fix OBS build.
  • [camera] Higher camera resolutions enabled with v11 blobs.
  • [f5121] Generate oem.img from SW binaries and flash it to cache partition.
  • [f5121] Mount cache under /system/vendor.
  • [droid-configs-device] Upgrade latest upstream version
  • [zypp] Prevent removing main HA packages.
  • [f5121] Add factory reset support F5121.
  • [shutdown] Update droid-configs-device for droid-hal-init shutdown.
  • [f5121] Improve vkb haptics.
  • [camera] Default front 4:3 viewfinder resolution had a green bar.
  • [camera] Enable flashlight.
  • [camera] Set a default front 4:3 viewfinder resolution that doesn’t show a green bar at the edge.
  • [sensors] Disable Hall sensor as f5121 doesn’t actually have one.
  • [wlan] Systemd service for macaddrsetup. Bring wlan0 up before connman starts so the change takes effect.
  • [f5121] Provide root readable screen configurations.
  • [f5121] Fix mute phonecall issue.
  • [f5121] Make hybris textures work on devices without BGRA.
  • [obs] Take products from OBS :dhd subproject.
  • [camera] 8mpix configuration.
  • [camera] 8mpix configuration.
  • [f5121] Initial CSD hw-settings.
  • [f5121] Initial CSD hw-settings.
  • [f5121] Remove custom hangup reasons.
  • [f5121] Add remote hangup reason.
  • [patterns] Add everything that upstream libhybris gives, for now.
  • [camera] Add better viewfinder resolution.
  • [f5121] Add jolla store apps by default on imager.
  • [f5121] Add more flashing instructions.
  • [camera] Initial camera configs.
  • [f5121] Add pulseaudio and gstreamer droid packages to hw pattern.
  • [f5121] Use Sony vendor id on flashing script.
  • [f5121] Fix typo in kickstart attachment.
  • [f5121] Initial kickstart configuration with LVM.
  • [dhc] Update upstream droid-hal-configs
  • [f5121] Add usb config files.
  • [f5121] Clean up patterns according to droid-configs upstream template.
  • [f5121] Add GPS packages to the patterns.
  • [f5121] Clean up GStreamer 0.10 packages from pattern.
  • [f5121] Clean up usb-moded configs.
  • [f5121] Provide ofono-configs.
  • [f5121] Update upstream droid-configs-device
  • [f5121] Add csd and sd-utils to pattern.
  • [f5121] Add ofono config.
  • [f5121] Add symbolic link to android sensors configs.
  • [f5121] Add udev rule for /dev/block/bootdevice.
  • [f5121] Add udev rule for touch driver.
  • [dcd] Patterns and compositor config

    droid-hal-version-f5122

  • Binaries added : droid-hal-version-f5122 – 0.2.1-1.2.20, droid-hal-version-f5122-doc – 0.2.1-1.2.20
  • [version] More deps.
  • [packaging] More explicit package deps.
  • [packaging] Move common.inc out of rpm dir.
  • [f512x] Fix build. MER#1880
  • [f5121] Refactor common parts
  • [f5122] Add Xperia X Dual SIM. MER#1880
  • [version] More detailed version deps for packages.
  • [dvd] Update latest upstream version
  • [dvd] Use native vibrator.
  • [dvd] Initial content.

    droid-system-f5122

  • Binaries added : droid-system-f5122 – 0.0.2-1.2.4
  • Unmet requirements: droid-system-f512x
  • [packaging] Provide droid-system.
  • [packaging] Initial version of f5122 droid-system.

    extra-cmake-modules

  • Binaries added : extra-cmake-modules – 5.42.0+git1-1.2.1
  • [extra-cmake-modules] Initial packaging for KDE extra cmake modules (ECM).

    feature-jolla-sdk

  • Binaries added : feature-jolla-sdk – 0.1-1.2.2
  • [feature-jolla-sdk] Initial commit.

    feature-omp-flashing-only

  • Binaries added : feature-omp-flashing-only – 0.0.8-1.2.5
  • [packaging] Conflict with other features.
  • [deps] Drop here plugin.
  • [deps] Require osm plugin.
  • [apps] Prevent removal of preinstalled apps.
  • [libs] Preinstall some libraries.
  • [settings] Allow sideloading.
  • [ssu] Disable some repos.
  • [apps] Add more apps by default.
  • [packaging] First version of flashing only feature.

    hybris-wifi-helper

  • Binaries added : hybris-wifi-helper – 0.0.1-1.2.4
  • [hybris-wifi-helper] Initial commit.

    latrace

  • Binaries added : latrace – 0.5.11+mer1-10.2.4.jolla
  • [mer] Converted to tar_git packaging format. – updated to new version – Specify and allow to build for ARM, solve MER#399 – Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild

    libblockdev

  • Binaries added : libblockdev-plugins-all – 2.14+git1-1.2.1, libblockdev-fs-devel – 2.14+git1-1.2.1, libblockdev-loop – 2.14+git1-1.2.1, libblockdev-crypto – 2.14+git1-1.2.1, libblockdev-fs – 2.14+git1-1.2.1, libblockdev-utils-devel – 2.14+git1-1.2.1, libblockdev-loop-devel – 2.14+git1-1.2.1, libblockdev-utils – 2.14+git1-1.2.1, libblockdev-devel – 2.14+git1-1.2.1, libblockdev-swap – 2.14+git1-1.2.1, libblockdev-crypto-devel – 2.14+git1-1.2.1, libblockdev – 2.14+git1-1.2.1, libblockdev-swap-devel – 2.14+git1-1.2.1
  • Unmet requirements: libblockdev-utils = 2.14+git1-1.2.1, libblockdev = 2.14+git1-1.2.1, libbd_part_err.so.2, libbd_utils.so.2, libblockdev-utils-devel, libblockdev-fs = 2.14+git1-1.2.1, libblockdev-swap = 2.14+git1-1.2.1, libblockdev-loop = 2.14+git1-1.2.1, libblockdev-crypto = 2.14+git1-1.2.1, libvolume_key.so.1, libblockdev-utils >= 0.11
  • [libblockdev] Add initial packaging.

    libkf5archive

  • Binaries added : libkf5archive-devel – 5.41.0+git3-1.3.3, libkf5archive – 5.41.0+git3-1.3.3
  • Unmet requirements: libkf5archive = 5.41.0+git3-1.3.3
  • [packaging] Fix aarch64 build
  • [packaging] Fix aarch64 build Fixes MER#1893
  • [karchive] Add an option to rename target file/path before extracting.
  • [karchive] Initial packaging for karchive.

    libwebp

  • Binaries added : libwebp – 0.6.1+git2-1.3.1, libwebp-devel – 0.6.1+git2-1.3.1, webp-tools – 0.6.1+git2-1.3.1
  • Unmet requirements: libwebp = 0.6.1+git2-1.3.1, libwebpmux.so.3, libwebp.so.7
  • [packaging] fix aarch64 build
  • [packaging] fix aarch64 build Fixes MER#1892
  • [libwebp] Package libwebp 0.6.1.
  • [packaging] Rename libwebp-tools package webp-tools.

    meson

  • Binaries added : meson – 0.44.0-1.2.1
  • Unmet requirements: ninja
  • [meson] Initial packaging. Contributes to MER#1883

    ngfd-plugin-native-vibrator

  • Binaries added : ngfd-plugin-native-vibrator – 1.0-1.2.4
  • [packaging] Update ngfd requirements.
  • [vibrator] Add sink interface type.
  • [vibrator] Update default effect configuration.
  • [vibrator] Use haptic API from NGFD 1.0.
  • [build] Add configure option to build native implementation.
  • [droid-vibrator] Split plugin and hal implementation.
  • [native-vibrator] Add native implementation.
  • [packaging] Add packaging for native vibrator.
  • [packaging] Bump droid vibrator version.
  • [packaging] Droid and native implementations conflict.
  • [packaging] Fix license for droid vibrator.
  • [README] Update description to mention native implementation.
  • [droid-vibrator] Change default notice event.
  • [droid-vibrator] Add support for new Android vibrator API.
  • [build] Install default sequence config.
  • [droid-vibrator] Add default sequence config.
  • [droid-vibrator] Add support for effect sequences.
  • [packaging] Package default sequence config.
  • [mer-hybris] Bump version number.
  • [haptic] Use haptic policy from ngfd 0.91
  • [mer-hybris] ngfd-plugin-droid-vibrator for mer-hybris packaging
  • [packaging] CMake-based build system, RPM packaging

    ninja

  • Binaries added : ninja – 1.8.2-1.2.1
  • [ninja] Initial packaging for Ninja. Fixes MER#1884

    qt5-feedback-haptics-native-vibrator

  • Binaries added : qt5-feedback-haptics-native-vibrator – 0.1.0-1.2.3
  • [build] Conditional build for droid or native implementation.
  • [packaging] Add packaging for native vibrator.
  • [packaging] Droid vibrator conflicts with native.
  • [vibrator] Add native implementation.
  • [vibrator] Split implementation to hal.
  • [qt5-feedback-haptics-droid-vibrator] Add support for new Android vibrator API.
  • [qt5-feedback-haptics-droid-vibrator] Rename private variable.
  • [qt5-feedback-haptics-droid-vibrator] Don’t install default ini.
  • [rpm] Don’t package default ini.
  • [qt5-feedback-haptics-droid-vibrator] Suppress category logs if not explicitly enabled.
  • [rpm] Increment package version
  • [qt5-feedback-haptics-droid-vibrator] Implement QFeedbackHapticsInterface.
  • [mer-hybris] Bump version number.
  • [packaging] Add missing build-dependency
  • [plugin] Initial commit

    qt5-qtmultimedia-plugin-mediaservice-halradio

  • Binaries added : qt5-qtmultimedia-plugin-mediaservice-halradio – 0.1-1.2.9
  • [halradio-plugin] Initial implementation of HAL fm radio plugin.
  • [packaging] Package HAL fm radio mediaservice plugin.

    re2c

  • Binaries added : re2c – 1.0.3-1.2.1
  • [re2c] Package re2c. Fixes MER#1885

    sailfish-archive

  • Binaries added : sailfish-archive-ts-devel – 0.0.4-1.3.5, sailfish-archive – 0.0.4-1.3.5
  • [sailfish-archive] Adjust cover opacity ramp.
  • [sailfish-archive] Use archive cover graphic.
  • [rpm] Fix build.
  • [rpm] Update package requirements.
  • [sailfish-archive] Introduce Sailfish Archive application.

    sailfish-archive-l10n

  • Binaries added : sailfish-archive-l10n-mr – 1.6.1-1.3.1, sailfish-archive-l10n-ru – 1.6.1-1.3.1, sailfish-archive-l10n-pt – 1.6.1-1.3.1, sailfish-archive-l10n-hi – 1.6.1-1.3.1, sailfish-archive-l10n-et – 1.6.1-1.3.1, sailfish-archive-l10n-gu – 1.6.1-1.3.1, sailfish-archive-l10n – 1.6.1-1.3.1, sailfish-archive-l10n-en_US – 1.6.1-1.3.1, sailfish-archive-l10n-sl – 1.6.1-1.3.1, sailfish-archive-l10n-de – 1.6.1-1.3.1, sailfish-archive-l10n-zh_HK – 1.6.1-1.3.1, sailfish-archive-l10n-bn_IN – 1.6.1-1.3.1, sailfish-archive-l10n-ja – 1.6.1-1.3.1, sailfish-archive-l10n-ko – 1.6.1-1.3.1, sailfish-archive-l10n-ml – 1.6.1-1.3.1, sailfish-archive-l10n-hu – 1.6.1-1.3.1, sailfish-archive-l10n-sv – 1.6.1-1.3.1, sailfish-archive-l10n-da – 1.6.1-1.3.1, sailfish-archive-l10n-pt_BR – 1.6.1-1.3.1, sailfish-archive-l10n-nb – 1.6.1-1.3.1, sailfish-archive-l10n-te – 1.6.1-1.3.1, sailfish-archive-l10n-tr – 1.6.1-1.3.1, sailfish-archive-l10n-es – 1.6.1-1.3.1, sailfish-archive-l10n-pa – 1.6.1-1.3.1, sailfish-archive-l10n-kn – 1.6.1-1.3.1, sailfish-archive-l10n-all-translations – 1.6.1-1.3.1, sailfish-archive-l10n-pl – 1.6.1-1.3.1, sailfish-archive-l10n-es_ES – 1.6.1-1.3.1, sailfish-archive-l10n-fi – 1.6.1-1.3.1, sailfish-archive-l10n-zh_TW – 1.6.1-1.3.1, sailfish-archive-l10n-en_GB – 1.6.1-1.3.1, sailfish-archive-l10n-zh_CN – 1.6.1-1.3.1, sailfish-archive-l10n-cs – 1.6.1-1.3.1, sailfish-archive-l10n-el – 1.6.1-1.3.1, sailfish-archive-l10n-tt – 1.6.1-1.3.1, sailfish-archive-l10n-fr – 1.6.1-1.3.1, sailfish-archive-l10n-ta – 1.6.1-1.3.1, sailfish-archive-l10n-nl – 1.6.1-1.3.1, sailfish-archive-l10n-it – 1.6.1-1.3.1
  • [l10n] Branched sailfish-archive from version 1.6
  • [l10n] Commit from Jolla localization : 7 of 7 strings translated (0 need review).
  • [l10n] New files added from Jolla localization based on templates
  • [tpl] translation templates update for 0.0.2

    sailfish-connman-iptables-plugin

  • Binaries added : sailfish-connman-iptables-plugin-tests – 0.0.4-1.2.6, sailfish-connman-iptables-plugin-config – 0.0.4-1.2.6, sailfish-connman-iptables-plugin – 0.0.4-1.2.6, sailfish-connman-iptables-plugin-unit-tests – 0.0.4-1.2.6, sailfish-connman-iptables-plugin-docs – 0.0.4-1.2.6
  • Unmet requirements: sailfish-connman-iptables-plugin = 0.0.4
  • [build] Add correct license to spec file.
  • [build] Makefile to use makefile style rm command at cleanup.
  • [build] Version bump to 0.0.4.
  • [code] Add connman_iptables_content typedef.
  • [code] Cleanup of license text and code.
  • [code] Cleanup of old D-Bus API.
  • [code] Cleanup rule adding function.
  • [code] Cleanup, test fix and new signals.
  • [code] D-Bus API parameter order corrected.
  • [code] Modify connman header name.
  • [code] Removed saving/restore from plugin.
  • [doc] Documentation and spec update.
  • [test] Disable test_rule_post from tests.
  • [build] Added libdbusaccess and libglibutil dependencies.
  • [code] Cleanup of duplicate checks for values.
  • [code] Code restructuring.
  • [code] Disable table param for GetIptablesContent D-Bus method.
  • [code] New D-Bus API with less methods (8).
  • [code] Use integers for D-Bus messages.
  • [code] Add iptables match use.
  • [doc] Docbook xml format documentation added.
  • [doc] Updated documentation.
  • [doc] Updated readme.md.
  • [feature] Add D-Bus method for iptables content retrieval.
  • [feature] Added loading of D-Bus policy from policy file.
  • [feature] Add iptables chain management.
  • [feature] Add signals for chain management and improve parameter use.
  • [feature] Custom table management with sfos_ prefix.
  • [feature] Keep track on iptables chain add/removal.
  • [test] Added QA testing xml and renamed end-to-end test.
  • [test] Add iptables save and restore test.
  • [test] Fix QA test script.
  • [test] Restructured test scripts.
  • [test] Run end-to-end test script also as privileged user.
  • [test] Updates to unit test and test script permissions.
  • [bug] Fix D-Bus message parameter use.
  • [bug] Fixed connman dbus connection use.
  • [bug] Fixes to issues in code that were found with unit tests.
  • [build] Removed -soname from LDFLAGs.
  • [build] Updated requirements in spec file.
  • [code] Improved IP address validation and cleanup.
  • [code] Remove save and load of iptables from D-Bus.
  • [code] Restructuring of code for unit test needs.
  • [code] Use changed headers of connman. Use BSD-3 license.
  • [doc] Updated documentation.
  • [doc] Updated XML specification also code restructuring.
  • [doc] XML specification to „spec“ dir.
  • [feature] Implemented access control with libdbusaccess.
  • [sailfish-connman-iptables-plugin] Removed -soname from LDFLAGs.
  • [test] Add a test tool for the iptables D-Bus API.
  • [test] Added automated unit tests.
  • [test] Add test running script and end-to-end test.
  • [test] Improved test script manageability.
  • [test] Improvements and restructuring to test script.
  • [test] Test script improvements.
  • [code] First version of sailfish iptables plugin for connman.
  • [doc] Added package spec and makefile.

    sailfish-devicelock-fpd

  • Binaries added : sailfish-devicelock-fpd – 1.0.3-1.3.19
  • Unmet requirements: sailfish-fpd >= 1.0.0
  • [devicelock] Proxy authenticating PID information.
  • [fingerprintservice] Leave lock code auth active.
  • [packaging] Do not use systemctl enable/disable.
  • [fingerprintservice] Use new fingerprint daemon D-Bus API.
  • [fpd] Make it build in OBS.
  • [devicelock] Don’t stop devicelock when mce is stopped.
  • [devicelock] Ensure the fpd device lock is started before the user session.
  • [devicelock] Enable device management.
  • [fpd] Port to daemonization of device lock.
  • [fingerprints] Require sailfish-fpd
  • [rpm] Increment version
  • [fingerprints] Add initial fpd device lock plugin.

    sailfish-fpd

  • Binaries added : sailfish-fpd – 1.1.3.1-1.4.2
  • Unmet requirements: sailfish-fpd-slave
  • [sailfish-fpd] Terminate if hal gets stuck in aborting state.
  • [sailfish-fpd] Make fpslave mirror logging target for daemon.
  • [sailfish-fpd] Use LOG_WARNING verbosity.
  • [fpd-slave] Fix cache directory permissions.
  • [build] Adjust source list for android build.
  • [fpd-slave] Add config file support.
  • [fpd-slave] Allow limiting number of allowed fingerprints.
  • [fpd-slave] Do not expect nonzero GID/FID during verification.
  • [fpd-slave] Add missing build requirement.
  • [fpd] Use android fingerprint hal.

    sailfish-fpd-slave-f5121

  • Binaries added : sailfish-fpd-slave-f5121 – 1.1.3.1-1.3.2
  • [sailfish-fpd] Terminate if hal gets stuck in aborting state.
  • [sailfish-fpd] Make fpslave mirror logging target for daemon.
  • [sailfish-fpd] Use LOG_WARNING verbosity.
  • [fpd-slave] Fix cache directory permissions.
  • [build] Adjust source list for android build.
  • [fpd-slave] Add config file support.
  • [fpd-slave] Allow limiting number of allowed fingerprints.
  • [fpd-slave] Do not expect nonzero GID/FID during verification.
  • [fpd-slave] Add missing build requirement.
  • [fpd] Use android fingerprint hal.

    sailfish-mdm-ofono-plugin

  • Binaries added : sailfish-mdm-ofono-plugin – 1.0.4-1.3.4
  • [mdm-ofono-plugin] Added mobile data filter plugin.
  • [mdm-ofono-plugin] Explicitely include <glib-object.h> where it’s needed. </glib-object.h>
  • [mdm-ofono-plugin] Made unit tests compatible with older dbus.
  • [mdm-ofono-plugin] Simplified unit_mdm_sms_filter_dbus.
  • [mdm-ofono-plugin] Added unit_mdm_sms_filter_dbus
  • [mdm-ofono-plugin] Initial commit.

    sailfish-mobile-os-rus-version

  • Binaries added : sailfish-mobile-os-rus-version – 0.1.3-1.2.37
  • [version] Make symbolic link relative to the path.
  • [packaging] Make version number shorter.
  • [packaging] Add dep to -variant.
  • [packaging] Add version identifier.
  • [packaging] Initial packaging of this variant package.
  • [packaging] Require sailfish-version.

    sailfish-secrets

  • Binaries added : libsailfishcryptopluginapi – 0.1.18-1.7.1, libsailfishcrypto – 0.1.18-1.7.1, sailfishsecretsdaemon-cryptoplugins-default – 0.1.18-1.7.1, sailfishsecrets-tool – 0.1.18-1.7.1, libsailfishcrypto-tests – 0.1.18-1.7.1, libsailfishsecretspluginapi-devel – 0.1.18-1.7.1, libsailfishsecrets – 0.1.18-1.7.1, sailfishsecretsdaemon – 0.1.18-1.7.1, libsailfishcryptopluginapi-devel – 0.1.18-1.7.1, libsailfishsecrets-devel – 0.1.18-1.7.1, libsailfishsecretspluginapi – 0.1.18-1.7.1, qt5-plugin-sqldriver-sqlcipher – 0.1.18-1.7.1, libsailfishcrypto-doc – 0.1.18-1.7.1, libsailfishsecretsplugin – 0.1.18-1.7.1, libsailfishcrypto-devel – 0.1.18-1.7.1, libsailfishsecrets-doc – 0.1.18-1.7.1, libsailfishsecrets-tests – 0.1.18-1.7.1, libsailfishcryptoplugin – 0.1.18-1.7.1, sailfishsecretsdaemon-secretsplugins-default – 0.1.18-1.7.1, sailfishsecretsdaemon-secretsplugin-common – 0.1.18-1.7.1, sailfish-secrets-ts-devel – 0.1.18-1.7.1
  • Unmet requirements: libsqlcipher.so.0, libsailfishsecrets = 0.1.18-1.7.1, pkgconfig(sailfishcrypto), pkgconfig(sailfishsecretspluginapi), libsailfishsecretspluginapi.so.0, pkgconfig(sailfishsecrets), libsailfishsecrets.so.0, sailfishsecretsdaemon-secretsplugin-common = 0.1.18-1.7.1, libsailfishsecretspluginapi = 0.1.18-1.7.1, libsailfishcryptopluginapi = 0.1.18-1.7.1, libsailfishcrypto.so.0, libsailfishcrypto = 0.1.18-1.7.1, libsailfishcryptopluginapi.so.0, libsailfishsecretspluginapi-devel = 0.1.18-1.7.1, qt5-plugin-sqldriver-sqlcipher, sailfishsecretsdaemon = 0.1.18-1.7.1
  • [sailfish-secrets] Data protection for sensitive files.
  • [sailfish-secrets] Protect lock code data.
  • [sailfish-secrets] Protect salt data.
  • [sailfish-secrets] Enforce building with C++11 support.
  • [sailfish-secrets] Initialize passwordagent once accepted.
  • [sailfish-secrets] Report collection lock state from CollectionNamesRequest.
  • [sailfish-crypto] Fix plugin API path issues.
  • [secrets] Fix rpmlint errors and reduce warnings.
  • [sailfish-secrets] Add InteractionViewUserCanceledError error code.
  • [sailfish-secrets] Add support for keep-unlocked semantics to secrets-tool.
  • [secrets] Align passphrase to lock code when applicable.
  • [sailfish-crypto] Add import-stored-key support to test tool.
  • [sailfish-crypto] Trigger collection unlock flow for crypto operations.
  • [sailfish-secrets] Add QueryLockStatus operation to LockCodeRequest.
  • [sailfish-secrets] Make PluginInfo read-only, fixes #90.
  • [secrets] Change SecretsDaemonLocked error to IncorrectAuthenticationCode when unlocking master.
  • [secrets] Change SecretsDaemonLocked error to IncorrectAuthenticationCode when unlocking master.
  • [secrets] Expose LockCodeRequest to qml.
  • [sailfish-crypto] Add customParameters arg to StoredKey/StoredKeyIdentifiers.
  • [sailfish-crypto] Rename some Result enum values.
  • [sailfish-crypto] Use VerificationStatus instead of bool for verified values.
  • [sailfish-secrets] Add missing hide_symbols to opensslcrypto in tests also.
  • [sailfish-secrets] Add VerifyUser continuations for DeviceLocked data.
  • [sailfish-secrets] Expand secrets tool to support DeviceLock semantics.
  • [sailfish-secrets] Improve authentication plugin API.
  • [sailfish-secrets] Improve readme.
  • [sailfish-secrets] Make testopensslcrypto plugin to link with libcrypt.
  • [sailfish-secrets] Use appropriate auth plugin depending on permissions.
  • [sailfish-secrets] Use auth_self for VerifyUser polkit policy.
  • [secrets] Split passphrase prompt text into multiple strings.
  • [sailfish-crypto] Implement Sign/Verify CipherRequest support.
  • [sailfish-crypto] Update plugin documentation for changes in key importation routines.
  • [sailfish-secrets] Expose PluginInfos to QML.
  • [sailfish-secret] Update plugin documentation for changes in key importation routines.
  • [sailfish-crypto] Improve ImportKeyRequest API.
  • [sailfish-secrets] Add default plugin packages that provides plugins.
  • [sailfish-secrets] Add more status reporting API to PluginBase.
  • [sailfish-secrets] Extend PluginInfo to expose more information.
  • [sailfish-crypto] Add collectionName parameter to StoredKeyIdentifiersRequest.
  • [sailfish-secrets] Add displayName() to PluginBase API.
  • [sailfish-secrets] Fix crash when opening signing again.
  • [sailfish-secrets] Use QPointer in crypto and secrets managers.
  • [sailfish-secrets] Add CCM support to Encrypt/DecryptRequest.
  • [sailfish-secrets] Explicitly set IV and tag lengths for CipherRequests.
  • [sailfish-secrets] Fix pre/post steps from daemon.
  • [sailfish-secrets] Write documentation for plugin implementers.
  • [sailfish-secrets] Add string translation ids.
  • [sailfish-secrets] Fix for recent method renamings.
  • [sailfish-secrets] Fix misspellings in the API.
  • [sailfish-secrets] Fix stray comma.
  • [sailfish-secrets] Fix warnings from QML.
  • [sailfish-secrets] Use US spelling.
  • [sailfish-secrets] Write command line tool.
  • [sailfish-crypto] Implement example USB token for documentation purposes.
  • [packaging] Fix broken dependencies.
  • [packaging] Align source package naming to comply with Pootle requirements.
  • [packaging] Cleanup spec.
  • [sailfish-crypto] Add custom parameters to Request.
  • [sailfish-crypto] fix packaging issues with tests
  • [sailfish-crypto] Perform crypto plugin operations in thread.
  • [sailfish-secrets] don’t build auth client without booster
  • [sailfish-secrets] fix compilation with OpenSSL 1.1
  • [sailfish-secrets] fix fallthrough
  • [sailfish-secrets] fix warning in tst_cryptorequests
  • [sailfish-secrets] Prevent bookkeeping database operation interleaving.
  • [sailfish-secrets] Serialise plugin operations via QtConcurrent.
  • [sailfishsecrets] Start sailfish-secretsd upon boot.
  • [sailfish-secrets] Fix libcrypto linking to sqlcipherplugin and opensslplugin test plugins.
  • [packaging] Fix build.
  • [sailfish-crypto] add basic QML test for signing flow
  • [sailfish-crypto] Add GCM support to DecryptRequest.
  • [sailfish-crypto] Add GCM support to EncryptRequest.
  • [sailfish-crypto] Add GenerateInitializationVectorRequest.
  • [sailfish-crypto] add signatureLength to SignRequest
  • [sailfish-crypto] Add ‚verified‘ value to indicate authenticated decryption result.
  • [sailfish-crypto] fix key references with sign/verify in openssl plugin
  • [sailfish-crypto] fix up stuff in QML
  • [sailfish-crypto] Remove authenticatedEncrypt/Decrypt().
  • [sailfish-crypto] Rename ‚tag‘ to ‚authenticationTag‘ for clarity.
  • [sailfish-crypto] Various fixes for encrypt/decrypt/iv changes.
  • [sailfish-secrets] Add missing dependencies for QML tests.
  • [sailfish-secrets] Add missing Qt5QuickTest dependencies and cleanup extras.
  • [sailfish-secrets] fix issues with Secrets QML module
  • [sailfish-secrets] Fix libcrypto linking to sqlcipherplugin and opensslplugin.
  • [sailfish-secrets] fix some packaging issues
  • [sailfish-secrets] Wrap StoredKeyIdentifiersRequest to be QML-friendly
  • [secrets] Add a lipstick password authentication plugin.
  • [secrets] Add ImportKey and ImportStoredKey requests.
  • [sailfish-crypto] add basic QML test for signing flow
  • [sailfish-crypto] Add GCM support to DecryptRequest.
  • [sailfish-crypto] Add GCM support to Encrypt/Request & DecryptRequest.
  • [sailfish-crypto] Add GenerateInitializationVectorRequest.
  • [sailfish-crypto] add signatureLength to SignRequest
  • [sailfish-crypto] Add ‚verified‘ value to indicate authenticated decryption result.
  • [sailfish-crypto] fix key references with sign/verify in openssl plugin
  • [sailfish-crypto] fix up stuff in QML
  • [sailfish-crypto] Remove authenticatedEncrypt/Decrypt().
  • [sailfish-crypto] Rename ‚tag‘ to ‚authenticationTag‘ for clarity.
  • [sailfish-crypto] Various fixes for encrypt/decrypt/iv changes.
  • [sailfish-secrets] Add missing dependencies for QML tests.
  • [sailfish-secrets] Add missing Qt5QuickTest dependencies and cleanup extras.
  • [sailfish-secrets] fix issues with Secrets QML module
  • [sailfish-secrets] Fix libcrypto linking to sqlcipherplugin and opensslplugin.
  • [sailfish-secrets] fix some packaging issues
  • [sailfish-secrets] Wrap StoredKeyIdentifiersRequest to be QML-friendly
  • [secrets] Add a lipstick password authentication plugin.
  • [secrets] Add ImportKey and ImportStoredKey requests.
  • [sailfish-secrets] Update version.
  • [sailfish-crypto] add support for SHA-512 and MD5 with tests
  • [sailfish-crypto] add support for some RSA paddings
  • [sailfish-crypto] add test for sign+verify with EC key
  • [sailfish-crypto] Carve out hard-coded AES
  • [sailfish-crypto] EC key generation
  • [sailfish-crypto] fix osslevp_key_is_rsa on OpenSSL < 1.1
  • [sailfish-crypto] new style for evp.c
  • [sailfish-crypto] Support for RSA encrypt/decrypt + tests
  • [sailfish-secrets] refactor plugin load mechanism
  • [sailfish-crypto] Add API for asymmetric cipher key pair generation.
  • [sailfish-crypto] Add autotests for GCM mode (for AES encryption).
  • [sailfish-crypto] Add CalculateDigestRequest.
  • [sailfish-crypto] Add cipher session encrypt/decrypt support.
  • [sailfish-crypto] Add CSPRNG functionality.
  • [sailfish-crypto] Add support for AES encryption with ECB, CFB, OFB.
  • [sailfish-crypto] Add support for CBC 128 and 192.
  • [sailfish-crypto] Allow the client to limit retrieve key data.
  • [sailfish-crypto] Allow user-defined data as input for KDF.
  • [sailfish-crypto] Don’t pad the cipher key.
  • [sailfish-crypto] Expose LockCodeRequest in Crypto API.
  • [sailfish-crypto] Fix bug in DeleteStoredKey request.
  • [sailfish-crypto] Fix bugs in stored-crypto-key codepaths.
  • [sailfish-crypto] Implement calculateDigest operation.
  • [sailfish-crypto] Implement sign+verify support.
  • [sailfish-crypto] Improve the encrypt/decrypt client API.
  • [sailfish-crypto] Include explicit signature parameter to verify().
  • [sailfish-crypto] Make sqlcipher plugin a crypto+storage plugin.
  • [sailfish-crypto] Only test GCM when testing CipherRequest.
  • [sailfish-crypto] Remove deleteStoredSecret from Crypto plugin interface.
  • [sailfish-crypto] Remove duplicated evp_p.h.
  • [sailfish-crypto] Remove explicit enum values that would be implicitly assigned
  • [sailfish-crypto] Remove hardcoded references to block mode enum values
  • [sailfish-crypto] remove included cpp file,
  • [sailfish-crypto] Remove unnecessary key hashing.
  • [sailfish-crypto] Support AES with CTR and XTS.
  • [sailfish-crypto] Support batch-mode Cipher requests.
  • [sailfish-crypto] Test sign+verify against openssl commandline.
  • [sailfish-crypto] Time-out inactive cipher sessions.
  • [sailfish-crypto] Unify stored-crypto-key book-keeping.
  • [sailfish-secrets] Add CollectionNamesRequest.
  • [sailfish-secrets] Add framework overview documentation.
  • [sailfish-secrets] Add SQLCipher-based EncryptedStoragePlugin.
  • [sailfish-secrets] Add SQLCipher driver plugin for QtSql.
  • [sailfish-secrets] Add support for InteractionRequest.
  • [sailfish-secrets] Allow EncryptedStorage plugins to be Crypto plugins.
  • [sailfish-secrets] Allow NoAccessControl semantic.
  • [sailfish-secrets] Allow plugin-target lock code request.
  • [sailfish-secrets] Allow user-requested data stored in secret.
  • [sailfish-secrets] debug print database file,
  • [sailfish-secrets] Derive key from code for secrets encryption.
  • [sailfish-secrets] Expose Secret type in top-level API.
  • [sailfish-secrets] fix plugin load mechanism,
  • [sailfish-secrets] Implement and expose filtering operations.
  • [sailfish-secrets] Implement master lock functionality.
  • [sailfish-secrets] OpenSSL compiles on 1.1.0,

    sailfish-secrets-l10n

  • Binaries added : sailfish-secrets-l10n-ja – 1.9.1-1.1.1, sailfish-secrets-l10n-es_ES – 1.9.1-1.1.1, sailfish-secrets-l10n-bn_IN – 1.9.1-1.1.1, sailfish-secrets-l10n-et – 1.9.1-1.1.1, sailfish-secrets-l10n-pt – 1.9.1-1.1.1, sailfish-secrets-l10n-sv – 1.9.1-1.1.1, sailfish-secrets-l10n-pt_BR – 1.9.1-1.1.1, sailfish-secrets-l10n-all-translations – 1.9.1-1.1.1, sailfish-secrets-l10n-sl – 1.9.1-1.1.1, sailfish-secrets-l10n – 1.9.1-1.1.1, sailfish-secrets-l10n-tt – 1.9.1-1.1.1, sailfish-secrets-l10n-el – 1.9.1-1.1.1, sailfish-secrets-l10n-pa – 1.9.1-1.1.1, sailfish-secrets-l10n-nl – 1.9.1-1.1.1, sailfish-secrets-l10n-zh_TW – 1.9.1-1.1.1, sailfish-secrets-l10n-ta – 1.9.1-1.1.1, sailfish-secrets-l10n-ml – 1.9.1-1.1.1, sailfish-secrets-l10n-en_GB – 1.9.1-1.1.1, sailfish-secrets-l10n-cs – 1.9.1-1.1.1, sailfish-secrets-l10n-it – 1.9.1-1.1.1, sailfish-secrets-l10n-zh_CN – 1.9.1-1.1.1, sailfish-secrets-l10n-de – 1.9.1-1.1.1, sailfish-secrets-l10n-nb – 1.9.1-1.1.1, sailfish-secrets-l10n-hu – 1.9.1-1.1.1, sailfish-secrets-l10n-mr – 1.9.1-1.1.1, sailfish-secrets-l10n-ru – 1.9.1-1.1.1, sailfish-secrets-l10n-te – 1.9.1-1.1.1, sailfish-secrets-l10n-da – 1.9.1-1.1.1, sailfish-secrets-l10n-ko – 1.9.1-1.1.1, sailfish-secrets-l10n-hi – 1.9.1-1.1.1, sailfish-secrets-l10n-es – 1.9.1-1.1.1, sailfish-secrets-l10n-gu – 1.9.1-1.1.1, sailfish-secrets-l10n-fi – 1.9.1-1.1.1, sailfish-secrets-l10n-fr – 1.9.1-1.1.1, sailfish-secrets-l10n-zh_HK – 1.9.1-1.1.1, sailfish-secrets-l10n-pl – 1.9.1-1.1.1, sailfish-secrets-l10n-tr – 1.9.1-1.1.1, sailfish-secrets-l10n-en_US – 1.9.1-1.1.1, sailfish-secrets-l10n-kn – 1.9.1-1.1.1
  • [l10n] Branched sailfish-secrets from version 1.9
  • [l10n] Commit from Jolla localization : 10 of 46 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.13
  • [l10n] Commit from Jolla localisation : 51 of 51 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.12
  • [l10n] Commit from Jolla localisation : 46 of 46 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.10
  • [tpl] translation templates update for 0.1.9
  • [l10n] Commit from Jolla localisation : 22 of 22 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.7
  • [l10n] Commit from Jolla localisation : 21 of 21 strings translated (0 need review).
  • [tpl] translation templates update for 0.1.6
  • [l10n] Commit from Jolla localization : 20 of 20 strings translated (0 need review).
  • [l10n] New files added from Jolla localisation based on templates
  • [tpl] translation templates update for 0.1.0
  • [tpl] translation templates update for 0.1.3

    sailfish-secrets-ui

  • Binaries added : sailfish-secrets-ui-ts-devel – 0.0.11-1.4.2, sailfish-secrets-ui – 0.0.11-1.4.2, sailfish-components-secrets-ui – 0.0.11-1.4.2
  • Unmet requirements: libsailfishsecretsplugin, sailfishsecretsdaemon-secretsplugin-common, libsailfishcrypto.so.0, sailfishsecretsdaemon-secretsplugin-ssl, libsailfishsecrets.so.0, libsailfishcrypto, libsailfishsecrets, libsailfishcryptoplugin, sailfishsecretsdaemon-cryptoplugin-ssl, sailfish-components-secrets-ui
  • [sailfish-secrets-ui] Support showing keys from arbitrary collections.
  • [secrets-ui] Support showing keys from arbitrary collections.
  • [secrets-ui] Use the key’s storage plugin as crypto plugin if possible.
  • [sailfish-secrets-ui] Allow passphrase entry when importing keys.
  • [secrets-ui] Add „Unlock“ option per plugin.
  • [secrets-ui] Use secret plugins for both document signing and settings page.
  • [secrets-ui] Don’t treat re-importing a key as an error.
  • [secrets-ui] Make it possible to enter master lock key.
  • [secrets-ui] Merged in venemo-jb40882-scalablesigning (pull request #17)
  • [secrets-ui] Refactor signing in preparation for scalability.
  • [secrets-ui] Signer: implement scalable signing mechanism.
  • [secrets-ui] Signer: method to determine signature path.
  • [secrets-ui] Treat CollectionAlreadyExistsError as success when creating a collection.
  • [secrets-ui] Various fixes and refactor.
  • [settings-keys] Move collection creation after import & generate.
  • [settings-keys] Remove fake keysLocked.
  • [secrets-ui] Don’t treat re-importing a key as an error.
  • [secrets-ui] Treat CollectionAlreadyExistsError as success when creating a collection.
  • [sailfish-secrets-ui] Fix placeholder busy.
  • [sailfish-secrets-ui] Change Settings->Keys to use real models.
  • [sailfish-secrets-ui] Refresh StoredKeysModel upon completed.
  • [sailfish-secrets-ui] Adapt to API changes.
  • [sailfish-secrets-ui] Fix requirements.
  • [sailfish-secrets-ui] Require secrets daemon.
  • [sailfish-secrets-ui] Make to possible to resign with another key.
  • [sailfish-secrets-ui] Support deletion of keys.
  • [sailfish-secrets-ui] Support importing of keys.
  • [sailfish-secrets-ui] Add Sailfish.Secrets.Ui module.
  • [sailfish-secrets-ui] Dependency to sailfish-secrets.
  • [sailfish-secrets-ui] Divide code shared by the sharing plugin and settings page into components, add translations hooks.
  • [sailfish-secrets-ui] Initial key selection view.
  • [sailfish-secrets-ui] Key generation dialog.
  • [sailfish-secrets-ui] Load translations for sharing page.
  • [sailfish-secrets-ui] Move key import and generation actions to pulley.
  • [sailfish-secrets-ui] Prototype signing functionality.
  • [sailfish-secrets-ui] Secrets and crypto QML components.
  • [sailfish-secrets-ui] Stub settings page.
  • [sailfish-secrets-ui] Stub sharing plugin.

    sailfish-secrets-ui-l10n

  • Binaries added : sailfish-secrets-ui-l10n-zh_TW – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-pt_BR – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-all-translations – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-te – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-ko – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-en_GB – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-ml – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-fr – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-fi – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-tt – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-de – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-nl – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-zh_HK – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-cs – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-zh_CN – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-ru – 1.9.1-1.1.1, sailfish-secrets-ui-l10n – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-ja – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-da – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-ta – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-pt – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-nb – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-bn_IN – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-hu – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-et – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-hi – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-it – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-mr – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-el – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-pl – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-sl – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-gu – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-tr – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-kn – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-en_US – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-pa – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-es_ES – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-sv – 1.9.1-1.1.1, sailfish-secrets-ui-l10n-es – 1.9.1-1.1.1
  • [l10n] Branched sailfish-secrets-ui from version 1.9
  • [l10n] Commit from Jolla localization : 50 of 50 strings translated (0 need review).
  • [tpl] translation templates update for 0.0.10
  • [tpl] translation templates update for 0.0.11
  • [l10n] Commit from Jolla localisation : 50 of 50 strings translated (0 need review).
  • [tpl] translation templates update for 0.0.9
  • [l10n] Commit from Jolla localization : 49 of 49 strings translated (0 need review).
  • [tpl] translation templates update for 0.0.8
  • [l10n] Commit from Jolla localization : 49 of 49 strings translated (0 need review).
  • [tpl] translation templates update for 0.0.5
  • [tpl] translation templates update for 0.0.7
  • [l10n] Commit from Jolla localization : 46 of 46 strings translated (0 need review).
  • [tpl] translation templates update for 0.0.3
  • [tpl] translation templates update for 0.0.4
  • [l10n] Commit from Jolla localization : 47 of 47 strings translated (0 need review).
  • [l10n] New files added from Jolla localisation based on templates
  • [tpl] translation templates update for 0.0.2

    sqlcipher

  • Binaries added : sqlcipher-devel – 3.4.1+git1-1.2.1, sqlcipher – 3.4.1+git1-1.2.1
  • Unmet requirements: sqlcipher = 3.4.1+git1-1.2.1
  • [sqlcipher] Fixed OBS build.
  • [sqlcipher] Package upstream version 3.4.1.

    udisks2

  • Binaries added : libudisks2 – 2.7.5+git8-1.5.2, udisks2 – 2.7.5+git8-1.5.2, libudisks2-devel – 2.7.5+git8-1.5.2
  • Unmet requirements: libblockdev >= 2.14, libudisks2.so.0, libblockdev-crypto >= 2.14, libudisks2 = 2.7.5+git8-1.5.2, libbd_utils.so.2, libblockdev.so.2, libblockdev-fs >= 2.14, libblockdev-swap >= 2.14, libblockdev-loop >= 2.14
  • [udisks2] Create mount path with 755 rights.
  • [packaging] Fix sourcing of a oneshot.
  • [udisks2] Disable zram udev rule for now
  • [udisks2] Cleanup packaging.
  • [udisks2] Udev rules for sda.
  • [udisks2] Initial package for udisks2 (2.7.5).

    volume_key

  • Binaries added : volume_key-devel – 0.3.9+git1-1.2.1, volume_key – 0.3.9+git1-1.2.1, volume_key-libs – 0.3.9+git1-1.2.1
  • Unmet requirements: libvolume_key.so.1, volume_key-libs = 0.3.9+git1-1.2.1

Dit vind je misschien ook leuk...